Promax Kit 2 DT-504B + DT-800. SD Blackout Kit

KIT content: 2 DT-504B + DT-800

The PROMAX kit solution based on the DT-504B converter converts up to 8 High Definition (HD) DTT channels to SD format, so that old televisions can continue to be used even if they are not HD. As many kits as necessary can be cascaded to increase the channel offering:

In addition to converting HD channels to SD format, it will also be possible to preserve the original HD channels by mixing the output with the original antenna source. Thus, modern televisions with HD receivers can coexist in the same installation with older receivers.

Information DT-504B Quad Video/Audio converter to DTT in standard definition (SD)

It generates an output in TDT (DVB-T) format from four analogue video and stereo audio inputs.

The DT-504B is a module with the capacity to generate a Digital Terrestrial Television multiplex from up to 4 analogue video and stereo audio inputs.

In total, the equipment generates four DTT channels in standard definition (SD).

Each A/V input has three RCA connectors, one for the video signal and the other two for the left and right audio signal.

The four A/V inputs are compressed into MPEG-2 format and combined into a single multiplex ready to be connected to any building's television signal distribution wiring.

The output signal can be tuned by both new high definition (HD) television models and older standard definition (SD) units.

Sheet with specifications in the Attachments section

Information DT-800 Control Unit and Power Supply

Control and power up to 7 modules, of any type, with Ethernet port for remote control from a PC.

The DT-800 controls and powers up to 7 modules of any type.

The control is specific per module and it is possible to change at any time the configuration of all the parameters of the receivers, modulators... The front panel keyboard and LCD screen provide easy access to module functions such as frequency tuning , output levels, service filtering, etc.

The administrator can prevent accidental or unauthorized access to the system by using an access password.

It has an Ethernet port in case the installer wants to take remote control from a PC. This can be especially interesting in the case of wanting to copy the configuration from one system to another or to reduce installation time.

Sheet with specifications in the Attachments section