Vonets VAP11G-500 Bridge WIfi Bridge + High-speed and high-range repeater

The WiFi bridge VAP11G-500 allows a high-speed WiFi connection in devices that only have an RJ45 network port. Its configuration is very simple, only 2 minutes. It needs power between 5V and 15V that can be obtained from the USB port or external feeder.

Vonets VAP11G-500 is a 300Mbps professional wifi bridge of reduced size that also performs the function of WiFi repeater. The new design unique in the world ensures lasting stability. It is based on the IEEE 802.11n, IEEE 802.11b and IEEE 802.11g standards.

Features

• Wifi bridge with Repeater function.
• Intelligent WiFi bridge mode that automatically scans WiFi networks and with Wi-Fi hotspot memory function ..
• Respectful with the environment, Safe, Portable, Mini.
• Compatible with all types of WiFi networks.
• Compatible with the IEEE 802.11 B / G / N standard up to 300 Mbps at 2.4 Ghz.
• The best option for Receivers, Android, IPTV, Sky Box, X-BOX, IP camera, Mediacenters ...
• Supports Security WPA-PSK / WPA2-PSK, 64/128 / WEP.
• Supports SSID identifier transmission.
• Connection support for more than 20 devices at the same time.
• Reception of signal at 500 meters without obstacles.
• Three parallel DC connections, one for power socket.
• It can be powered by USB.
• Very small dimensions: 1.5cm x 4.5cm x 9cm.
• CE Certificate
• Compatible with VoIP phones and ATAs.
• Compatible with IP cameras.
• It supports firmware updates through the WEB interface.

There are 2 ways to power the VAP11G-500, connecting it directly to a USB port or using a DC power adapter that should not be more than 15V. In this way we can feed the device itself, IP camera, receiver, etc ...

Afterwards, we only have to install the software on a PC or Laptop to configure it and finally connect the RJ45 cable of the VAP11G-500 to the device.

VAP11G-500 in WiFi repeater mode will allow you to extend your existing WiFi signal stably. The way of working is the following: when connecting it to any equipment with RJ45 it will connect to the Router (Hotspot) and at the same time repeat its Wi-Fi signal, increasing the coverage of it, all this quickly and easily, from your own browser Web.

VAP11G-500 provides three types of power, forget to carry a lot of power adapters, has all kinds of connectors included as standard, so you can easily power it, for example if you have an IP camera you can connect the power supply to the VAP11N and this connect to the camera, so that with a single source would feed both computers.

As for the configuration software, a simple and easy-to-use design has been chosen, without having to access an IP address to access the configuration, since it uses configuration techniques of virtual configuration domains (IPMP).

Specifications