Out-of-Stock

Fujikura 22S Fiber Optical Fusion Splicer Active Alignment

Name: Fujikura 22S Fiber Optical Fusion Splicer Active Alignment
Brand: Fujikura
SKU: fujikura-22s
Availability: OutOfStock

Brand: Fujikura

Sku: fujikura-22s

The Fujikura 22S, the World's Smallest & Lightest Active V-groove splicer and designed to provide an advanced FTTH Splicer. Applicable from 125/Up to 3mm diameter fiber with a sheath clamp or interchangeable fiber holder. Quick splicing time is produced in 9 seconds.

(0)

I agree to provide my data in order to process my orders and requests.

In compliance with the provisions of Article 13 of Regulation 2.016/679, of April 27, of the European Parliament and of the Council, General of Data Protection we inform you of the following points: Responsible: Conexion B2B 2005, SL Purpose: the organization of telematic communications with clients, client companies, suppliers, official bodies and, in general, with any other third party with whom this type of communications is maintained. Legitimation: the legitimate interest for the development of the activity of the Data Controller and the consent of the interested party. Recipients: Communications or transfers of data are not expected. Rights: access, rectify and delete data, as well as other rights as indicated in the additional information.
Additional Information: or in the email info@orbitadigital.com.

Kit consists of: 1 unit 22S .Máquina fully automatic fusion splicing high performance and a single fiber, single mode and multimode valid. Alignment in all three axes. Easy to drive. Especially for work at heights, the lightest on the market. Weight 1140g (with battery). Incorporado.Dimensiones heater 120x189x72 mm. 2 years warranty.
ADC-19 and ACC-15.

Kit includes:

1 set of electrodes (ELCT2-12).
1 Power cord.
1 unit of Battery (BTR-11).
1 unit CT-06: Accuracy cutter.
1 rigid carrying case.

Specifications

Applicable fibers Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655)
Cladding dia. / Sheath dia. 125 μm / 100μm to 3mm with sheath clamp
Cleave length 5mm to 16mm
Splice mode / heating mode Total 100 splice modes / 30 heating modes
Typical splice loss 0.03dB (SM), 0.01dB (MM), 0.05dB (DS) and 0.05dB (NZDS)
Measured by cut-back method relevant to ITU-T and IEC standards.
Splice time / tube heating time Typical 7sec with SM / Typical 30sec with FP-03 (60mm) sleeve
Splice result storage Last 2000 splices
Viewing methods / magnification 2 axis 2CMOS camera with 4.73” color LCD. 132X magnification.200X magnification after splicing
Tension test 1.96 to 2.25N
Applicable protection sleeve 60mm, 40mm and Fujikura micro sleeves
No. of splice / heating per battery full charge * 1 Typical 200 cycles with BTR-11
Electrode life 3000 splices
Size / weight 120W x 189D x 72H mm / 1140g (including battery)
Operating condition Altitude : 0 to 3,660m above sea level, Wind : 15m/sec
Temperature : -10 to 50deg C, Hμmidity : 0 to 95%RH, non-dew
Other features PC software upgrade / data management
Resistance features * 2 Shock resistance : 76cm (30inch) bottom surface drop
Dust resistance : Exposure to dust (0.1 to 500μm dia. Alumina Silicate).
Rain resistance : H=10mm/hr for 10min