FLASH CAPTOR 30 AT-5330 Lightning rod with ignition device (∆t 30µs)

The Flash Captor Lightning Rod with Emission Device anticipates any other element within its protected zone, capturing the lightning to conduct its current to earth through a safe path.

• High voltage pulse emitter.
• Totally autonomous.
• Metal structure in stainless steel.
• Electroatmospheric condenser.
• Verifiable on site and in the factory with specific equipment.

Certified in accordance with UNE 21186:2011, NF C 17-102:2011 and NP4426:2013 standards in which the advance time is determined after passing, on the same sample, the following tests:

• Salt fog test.
• Test in humid sulphurous atmosphere.
• Withstand current test 100kA (10/350µs).
• Advance time test ΔT.

Flash Captor lightning rods with ignition device must be installed in accordance with the Technical Building Code (CTE) and the UNE 21186:2011, NFC 17-102:2011 and NP4426:2013 standards.

Technical characteristics

• Material: AISI 316L stainless steel
• Weight: 3kg
• External diameter (central body): 60 mm
• Length: 325mm
• Advance time (ΔT): 30μs

Radius of protection in meters (RP)

Calculated according to the Technical Building Code (CTE), UNE 21186:2011, NFC 17-102:2011 and NP 4426:2013.

h (m): Height of the lightning rod above the element to be protected (in meters).

D: Radius of rolling sphere.