Outdoor optical receiver CATV OLC Televes without return channel Local
This device transforms the downstream optical signal into a radio-frequency signal; furthermore, it transforms the radio-frequency signal produced by the cable-modem and/or the user's STB (return channel) into an upstream optical signal.
The coaxial backbones of the operator networks are being replaced with optical fibre lines. The optical network ends where the subscriber's coaxial network is serviced. These networks that use both transmission media are known as HFC networks (Hybrid Fibre Coaxial).
An element is required to work as an interface between the optical backbone and the coaxial network where both media meet; this device is the Optical Node.
This device transforms the downstream optical signal into a radio-frequency signal; furthermore, it transforms the radio-frequency signal produced by the cable-modem and/or the user's STB (return channel) into an upstream optical signal.
Occasionally, when communication is exclusively downstream, an optical receiver is installed instead of the optical node to transform optical signals into radio-frequency signals.
Optical nodes and receivers from Televés include OLC (Optical Level Control), a system capable of preserving the radio-frequency signal regardless of the optical input
Main features
- Equipped with OLC (Optical Level Control), which automatically regulates its parameters to provide a constant output level regardless of the channel load
- Configurable return channel with attenuator and equalizer
- Forward channel with independent attenuation and equalization adjustment between stages
- High output voltage, low power consumption
- Perfect for RF Overlay, FTTB and FTTC applications
- Parameter values are adjusted using plug-in jumpers at the front of the equipment (equalization, attenuation, etc.)
- Test socket
- Full bandwidth optical reception
- Aluminium-manufactured, the chassis ensures durability in outdoor installations
Specs
References | 231220 | |
Forward Path | ||
Bandwidth | MHz | 40 ... 1006 |
Optical Input Level for the OLC | dBm | -8 ... +1 |
Flatness | dB | ± 0.75 |
Outputs (selectable) | 1 or 2 | |
Output signal level with OLC enabled, Output 1 | dBµV | 113 |
CNR/CSO/CTB | dB | >52/>60/>60 |
Input attenuator | dB | 4/6 |
Inter stage attenuator | dB | 1/2/3/4/5/6/7/8 |
Output level slope | dB | 4/9 |
Wavelength | nm | 1200 - 1600 |
Return Path | ||
Bandwidth (selectable) | MHz | - |
Optical output level | dBm | - |
Flatness | dB | - |
RF input level | dBµV | - |
Wavelength | nm | - |
General | ||
Local mains voltage | V~ | 99 - 253 |
Max. consumption with local/remote powering | W | 16.5 |
Current max. consumption (local powering) | mA | 300 |
Dimensions | mm | 232 x 90 x 140 |
Weight | g | 1825 |
Index Protection | IP | 61 |
More info
Summary
0
(0 Reviews)
Select a row below to filter reviews.
No customer reviews for the moment.