- -10%
- -10%
Replacement electrodes for the PROMAX PROLITE-41 Fiber Optic splicer (2 units). It is recommended that they be replaced every 2,500 fusions.
Promax AF-002D Replacement electrodes for PROLITE-42 (2 units)
promax-af-002d
€196.02
€217.80
10%
Tax included
Replacement electrodes for the PROMAX PROLITE-41 Fiber Optic splicer (2 units). It is recommended that they be replaced every 2,500 fusions.
The electrodes are a basic element to be able to make fusion junctions of quality optical fiber.
The electrodes wear with use and have to be cleaned periodically due to the accumulated silica oxide. It is recommended to replace the electrodes after 2500 arc discharges.
Normally the splicer will warn with a message "no arc" when the electrodes are worn
These electrodes are supplied in pairs.
Recommendation Changing Electrodes
To carry out the electrode change you must follow the following instructions:
- Turn off the instrument and disconnect the power cord.
- Open the lid. The image shows the distribution of the electrodes.
- Remove the electrodes by loosening the screw of the electrode holder. Install the new pair of electrodes and tighten the screw alternatively while pushing the isolated part of the electrode.
- Connect the power cable, turn on by pressing the power button and stabilize the electrodes.
promax-af-002d
Summary
0
(0 Reviews)
Select a row below to filter reviews.
Only users who already bought the product can add review.
No customer reviews for the moment.
You might also like
- -10%