-10%

Promax IC-081C PROFINET Industrial Ethernet Verifier

Name: Promax IC-081C PROFINET Industrial Ethernet Verifier
Brand: Promax
SKU: promax-ic-081c
Price: 3158.1 EUR
Availability: InStock

Brand: Promax

Sku: promax-ic-081c

€3,158.10

€3,509.00

10%

Tax included

Wiremapper for active copper and fiber optic networks with support for industrial Ethernet (PROFINET) and fully compatible with IPv4 and IPv6. It allows you to export data in PDF format via USB or Wi-Fi without the need for a computer.

(0)

The PROMAX IC-081C cable tester is designed to prevent and solve problems in both active and passive fiber optic, copper and industrial Ethernet (PROFINET) networks. The wide range of tests included in the verifier allows you to fully characterize the network under test, even if it is a working network.

With auto configuration mode for Ethernet and optical networks, the IC-081C detects the characteristics of the port under test. Thus, the instrument configures itself and executes the appropriate tests, for example, for open cables, network equipment in operation or cables with network traffic without interrupting the service. Likewise, the user has available quick access to manual test modes. Thanks to the customizable tests it is possible to obtain port information (MAC address, identification...) and guarantee that its configuration will allow it to achieve objectives in terms of connectivity on the local network and provide Internet service on a standard Ethernet network.

The IC-081C cable verifier includes an Autotest mode that speeds up the measurement process: The user just needs to connect the instrument sequentially to each of the ports to be tested. Test results are automatically stored without requiring user intervention. Test results can be analyzed and shared after the job is done. The equipment can export the data to a USB memory or transfer them to the mobile phone by Wi-Fi.

The IC-081C cable tester supports Industrial Ethernet (PROFINET) networks. These tests can obtain information about nodes (devices) using SNMP and DCP protocols without interrupting network traffic.

Specifications

CONNECTIONS	Replaceable RJ-45, Optical Connector, USB Connector (WiFi adapter, export measurements, 802.1x certificates, export/import configuration, update firmware)
INTERFACE	Touch screen and status LEDs
TESTS (ETHERNET MODE)	Ping4, Ping6, Trace Route4, Trace Route 6, Hub Blink, Netscan, Loopback, Mapping (RJ-45 only), Net Test (Ping DNS/Gateway/Internet, Trace Route, Netscan)
TESTS (CABLE MODE)	Tone Generator, Auto Mapping
TESTS (OPTICAL MODE)	Tx and Rx powers (with specific SFP), Rx max and Tx powers under pass/fail limit
VLAN SUPPORT	On/Off, VLAN ID (0 to 4094), VLAN Priority (0 to 7)
SUPPORT 802.1x	On/Off. User, Password, Certificate, Import password, Root Certificate/CA
TESTS ON THE CABLE without remote terminal with remote terminal	Open circuit (per pair), Short circuit (per pin), Pair length (3 to 100m) Voltage Warning (>±10V on any pin), Pass/Fail Mode, Open Circuit (per pin), Short Circuit (per pin), Crossed Pairs, Split Pairs, Jumper Shorts, Remote Shorts, Pair Length (3 to 100 m), Audible Tone Generator
WIRE TYPES	CAT3/5/5e/6/6a/7/7a/8, USOC8 (1-2-3-4 pairs), ETH 1236, ETH 1278, PROFINET 4W, COAX RGxx, ISDN BRI, DB, Custom
TESTS ON INDUSTRIAL ETHERNET (PROFINET)	Node status, Node details (name, address, subnet, ID...), Details (name, MAC...), Interface port selection, Port statistics (status, speed...), Statistics of Rx and Tx (errors, use, traffic...), Config. Node, Comparator, Error Log (1 to 48 h)
STORAGE	Configurations (Factory and Personal), 802.1x Certificates (10 max), 50 projects (with 5000 max results), Data export via USB or WiFi to PDF/CSV