NSA Network Qualifier Kit K30E

NSA Network Qualifier Kit K30E. No longer do users have to decide between the purchase of a qualification network tester or a cable certifier, the Network Service Assistant bridges the gap, with a Qualification+ hybrid solution featuring Certi-Lite.

The Network Service Assistant (NSA) is a hybrid test solution, that bridges the divide between qualification and certification, and features Certi-Lite technology.  Certi-Lite follows the ANSI/TIA 1152-A single-ended testing for many of the same parameters used in bi-directional certification.  Single-ended testing does not qualify for cable manufacturer warranty approval, but for those that do not require the warranty, and simply desire a deeper level of cable testing beyond just a simple wiremap, NSA’s is the first test solution to offer Certi-Lite.

IT departments often find a need to ensure the cabling infrastructure meets a certain test standard. This is needed to ensure support for a given application, or simply to support moves/adds/changes. Historically, this requires the purchase of two or even three different types of testers, that span wired, wireless, and certification capabilities, which becomes cost prohibitive. The NSA is offered at a fraction of the cost for what you would typically need to spend in multiple testers to get this much test function. And, because the NSA is modular, adding more test function as needs change, or AEM continues to add capabilities, such as OTDR, it’s as easy as hot swapping a test adapter to expand your testing capability.

NSA Certi-Lite Test Kit Copper – K30E

The K30E supports Certi-Lite standards based single-ended cable test, PoE load testing for 802.3 af/at/bt, UPoE, SNR based Multi-Gigabit link speed testing up to 10GigE, Network Connectivity and Wireless Connectivity testing.

Wireless testing requires an optional Wi-Fi dual band USB Adapter. 

Kit Contains all Standard Components with Small Carry Case:

• One Modular NSA Platform
• AD-NSA Test Adapter – Supports Certi-Lite, Multi-Gig, PoE, Network Testing
• NSA Remote ID#1
• CAT6A RJ-45 Coupler
• Carrying Case
• Wiring Rack Hanging Strap
• USB Flash Drive with Documentation and TestDataPro software access
• Quick Start Guide
• USB Cable
• Power Adapters with region-specific pins
• Wireless Network Testing is Inherent to the NSA Platform and is therefore supported by all kit options.

Downloads

datasheet

Advantages

Certi-Lite

• Single-ended ANSI/TIA 1152-A compliant RF testing involving the measurement of complex cable parameters such as Return Loss, NEXT, Insertion Loss, ACRF, length, delay, shield discontinuity, and graphical TDR analysis of faults.

Fiber Optic Loopback and Voltage for Hybrid Powered Fiber

• OTDR troubleshooting with Singlemode and Multimode test adapters.
• Loopback testing with Singlemode and Multimode test adapters ensures cable quality and includes reports of all supported network speeds based on cable performance. 
• Integrated VFL identifies cable breaks. 
• Fiber scope identifies debris or scratches that could affect cable quality. 
• Measures DC Resistance in Hybrid powered fiber.

PoE Load Testing

• All PoE standards, which include 802.3 af/at/bt and UPoE are supported for reporting of PSE configuration and full load testing with reporting of Current/Wattage/Voltage. In addition, it also allows for sustained loading of the PoE source over longer periods to identify hard to find intermittent power drops, through external loads.

Multi-gig Link Speed Testing

• Signal-to-Noise Ratio (SNR) testing of link speed, while under both traffic and PoE load up to 10GigE to provide assurance the cabling link will support the desired network rate up to 10GigE.

Network Connectivity Testing

• Network discovery with drill down into seen devices.
• Switch detail include slot/port/VLAN.
• Troubleshooting Toolkit includes Traceroute, Ping, Traffic Generator, and TCP Connect.
• Network Autotest feature including savable report.

Wi-Fi Testing

• Auto-discover all 2.4GHz and 5GHz Wi-Fi SSIDs and their associated RSSI values (received power level).
• Roaming signal strength tool useful for uncovering Wi-Fi “dead zones”.
• Troubleshooting Toolkit includes Traceroute, Ping, Traffic Generator, and TCP Connect.
• An optional Wi-Fi USB Adapter is required and must be purchased separately.

Up to a 5-Year Warranty

• TestPro comes with a 2-year manufacturer warranty against defects from date of purchase.
• Upon product registration within 90-days of purchase, AEM will extend that warranty to 5-Years. 

Training

• Upon product registration, receive access to a complimentary on-demand training video library.
• Complimentary 2-hour live training class, with Certificate of completion.