Koovik 2AVPro3 - Double A/V encoder, SD TDT modulator and IP streamer COFDM DVB-T 1080p Gigabit

Distribution of A / V content in standard definition in coaxial TDT and Gigabit Ethernet networks

The 2AVPro3, is a standard compact double definition modulator (two independent A / V signals and / or an ASI signal) with a DVB-T / ISDB-T and Streamer Multicast modulator, with wall mounting.

Features

• Its DVB-T or ISDB-T modulator makes the 2AVPro3 the ideal choice to capture two sources of SD audio / video, both live and recorded, and distribute it to a multiplex in VHF or UHF.
• Distributes content in standard Coaxial networks, in commercial or residential buildings, University Campus, Hotels, Military Installations, Digital Signage, etc.
• The injection of digital content in the coaxial network, does not require modifications of wiring, is very flexible (allows to move or add more TV receivers according to the needs) and allows to combine it with the contents that are received by antenna.
• It has a Streamer Multicast to distribute the High Definition content in GigbE and WiFi LAN networks (dual band, 450 Mbps).
• That video and High Definition Audio are available in the LAN, offers multiple possibilities not only in the domestic sphere but also for professionals who need to access or record that content from their desktop computer or from their laptops, as journalists, etc.
• Multiple 2AVPro3 can be used in the same installation when more digitally distributed A / V content is required.
• Provided you have the property rights to do so, you can distribute the digital content within your network and record it on any DVB-T / ISDB-T device or on the computer's hard drive.
• With a professional modulation quality and a MER greater than 42dB, the 2AVPro3 can be used not only in MATV / CATV installations and in the most demanding domestic installations, but also for small broadcast emissions.

Built-in keyboard and LCD screen

The 2AVPro3 has a built-in keyboard and LCD screen for quick configuration without the need for additional tools.

The installer can select the appropriate video and audio Bitrate, the Modulation Bandwidth, the Constellation, the 2K or 8K Transmission Mode, the Guard Interval, the "Code Rate", the Frequency and RF output level, IP multicast network parameters.

Configuration using WEB manager

When a more detailed configuration is required or a configuration is saved or reused, the HDPro3 can be adjusted using a built-in web server. Simply connect your laptop to the NMS Ethernet connector (either directly or through your local network). Enter the IP address in a standard browser, and you will see the configuration menu protected by username and password. No software installation is required.

Using the NMS, the installer has full access to the configuration of parameters including tables NIT, LCN, etc. You can also save the configuration parameters for later reuse on this or another computer.

Specifications