Koovik SDIPro3 SDI Encoder, HD DTT modulator and IP streamer COFDM DVB-T 1080p Gigabit
The Koovik SDIPro3, is a compact High Definition modulator (SDI or ASI) with a DVB-T / ISDB-T and Streamer Multicast modulator, with wall mounting.
Distribution of High Definition content in coaxial DTT and Gigabit Ethernet networks
The SDIPro3, is a compact High Definition modulator (SDI or ASI) with a DVB-T / ISDB-T and Streamer Multicast modulator, with wall mounting.
Its DVB-T or ISDB-T modulator makes the SDIPro3 the ideal choice to capture any HD audio / video source, both live and recorded, and distribute it to a multiplex in VHF or UHF.
Distributes content in standard Coaxial networks, in commercial or residential buildings, University Campus, Hotels, Military Installations, Digital Signage, etc.
The injection of high definition content in the coaxial network does not require any wiring modifications, it is very flexible (it allows you to move or add more TV receivers according to your needs) and allows you to combine it with the contents received by the antenna.
It has a Streamer Multicast to distribute the High Definition content in GigbE and WiFi LAN networks (dual band, 450 Mbps).
That High Definition Video and Audio are available on the LAN, offers multiple possibilities not only in the domestic sphere but also for professionals who need to access or record that content from their desktop computer or from their laptops, as journalists, etc.
Multiple SDIPro3 can be used in the same installation when more SDI content is required.
The SDIPro3 offers maximum quality and maximum resolution up to 1080p. It not only offers spectacular images, but also allows very clear text messages in digital Signage applications.
Be sure to select only good quality cameras, 50 or 60 fps. Lower frame rates are not supported.
Provided you have the property rights to do so, you can distribute the HD content within your network and record it on any DVB-T / ISDB-T device or on the computer's hard drive.
With a professional modulation quality and a MER greater than 42dB, it allows SDIPro3 to be used not only in MATV / CATV installations and in the most demanding domestic installations, but also for small broadcast emissions.
Features
Built-in keyboard and LCD screen
The SDIPro3 has a built-in keyboard and LCD screen for quick configuration without the need for additional tools.
The installer can select the appropriate video and audio Bitrate, the Modulation Bandwidth, the Constellation, the 2K or 8K Transmission Mode, the Guard Interval, the "Code Rate", the Frequency and RF output level, IP multicast network parameters.
Configuration using WEB manager
When a more detailed configuration is required or a configuration is saved or reused, the HDPro3 can be adjusted using a built-in web server. Simply connect your laptop to the NMS Ethernet connector (either directly or to your local network). Enter the IP address in a standard browser, and you will see the configuration menu protected by username and password. No software installation is required.
Using the NMS, the installer has full access to the configuration of parameters including tables NIT, LCN, etc. You can also save the configuration parameters for later reuse on this or another computer.
Specifications
All specifications are subject to change without notice |
||
SDI video |
Inputr |
1 x SDI - BNC Female |
Encoder |
H.264/MPEG-4 AVC High Profile Level 4.0 (HD) o 3.0 (SD) |
|
Resolution |
1920x1080p, 1920x1080i, 1280x720p, 720x480i, 720x576i. Frame rate : 50fps o 60 fps. SDIPro3 does NOT support other lower speeds like 24fps, 25fps or 30fps |
|
Audio |
Encoder |
MPEG1 Layer II |
Freq. sampling |
48KHz, 44.1KHz |
|
Bit rate |
64kbps, 96kbps, 128kbps, 192kbps, 256kbps, 320kbps or 384kbps |
|
Input |
1 x BNC Female |
|
Output |
2 identical ASI outputs for monitoring and / or connecting to other equipment. BNC Female |
|
Multiplex0r |
With ability to remove programs from TS ASI and combine the rest with HDMI content to build a new multiplex. |
|
RF modulator |
Standard |
COFDM DVB-T EN 300 744 (DVB-C, ISDB-T and ISDB-Tb as an option) |
FFT mode |
2K o 8K |
|
Bandwidth |
6MHz, 7MHz, or 8MHz |
|
Constellation |
64QAM, 16QAM, QPSK |
|
Int.Guarda |
1/4, 1/8, 1/16, o 1/32 |
|
FEC |
1/2, 2/3, 3/4, 5/6, o 7/8 |
|
M.E.R. |
≥42dB |
|
Frequency |
30 to 862MHz, 1KHz jump (usable up to 1000MHz with unguaranteed specifications) |
|
Output level |
-30 to -10dBm (81 to 97 dBμV), jump of 0.1dB |
|
Connectors |
"F" female |
|
IP output |
Type |
UDP Multicast |
Red |
Gigabit Ethernet |
|
WiFi |
Use Linksys E4200 router or similar High Speed |
|
Installation |
Locally |
Built-in keyboard and LCD screen |
Remotely |
Web-based Management System (in English) |
|
General |
Dimensions |
Device: 270x265x45mm (WxHxT) including connectors. Packing box: 530x360x100mm (WxHxT) |
Weight |
Net: 2.60 Kgs Gross: 3.00 Kgs |
|
Power Supply |
Built-in power supply (100 to 240VAC), Consumption: 18VA |
|
Temperature |
Operating: 0 to 45 ° C up to 90% humidity |
|
Included |
1 x BNC coaxial cable, 1 x network cable |
Summary
0
(0 Reviews)
Select a row below to filter reviews.
No customer reviews for the moment.