Honeywell MPIDC1 MAXPRO Intrusion Door Control Module 1 (1 door,…

Honeywell MPIDC1. MAXPRO Intrusion Door Control Module 1 (1 door, up to 2 readers). Control of one door for connection to MAXPRO control panels. Two readers selectable for input or output. Programmable 12V DC relay for door lock. Control of reader, buzzer and 3 LEDs. Tamper protection Modulo expasion control de accesos mpi-dcm de 1 puerta para paneles de intrusion maxpro. 2 entradas.

Single door access control module. Connects to a Max Pro control panel. Provides access and egress to the protected premise. Adding more than one MPIDC1 module increases the number of access points and each communicates with a Control Panel via the IB2 communication bus.

Specifications

• MAXPRO Intrusion Door Control Module 1 (1 door, up to 2 readers)
• Uses high power bus line for star or parallel wiring up to 3.65 km (2 miles)
• Applicable as a single door controller with 2 readers (input/output)
• Reads HID 26, 32, 34, 35 and 48 bit, Mifare Classic 32 bit, Desfire 56 bit and EM4102 26 and 40 bit format cards
• Has relay contact for door control (12V DC, 1.5A)
• Door status input and push-button output available
• Power supply: 13.8V DC nominal (10V ~ 14.5V DC)
• Consumption: 60 mA standby, 185 mA with relay active
• Operating temperature -10°C ~ +50°C (-10°C ~ +50°C)
• Relative humidity 93% (non-condensing)
• Dimensions: 130 (W) x 86 x 26 mm
• Weight: 120 g

- HONEYWELL-237