Fibaro FGR-223 Shutter 3 FIBARO module for remote control of…

Fibaro FGR-223. Shutter 3 FIBARO module for remote control of motorized blinds, Venetian blinds, awnings and gates. Based on Z-Wave 5 technology. Works with single-phase AC. Provides precise positioning of blinds, awnings or doors. Incorporates power measurement function when used with a FIBARO Home Center. Compatible with any Z-Wave or Z-Wave Plus controller. Supports Z-Wave S0 (Z-Wave Network Security) protected mode with AES encryption and S2 with PRNG encryption. Compatible with all VESTA panels (Z-Wave) Supports blind motors with mechanical and electrical limit switches. It works on the basis of advanced microprocessor control. It allows measuring the active power and the total energy consumption. It works with different types of buttons: monostable, bistable and roller blinds. Designed for installation in flush-mounted or surface-mounted boxes that meet national safety standards. Fgr-223 roller shutter 3.

Specifications

Radio protocol: Z-Wave (500 series chips)

Radio frequency: 868.4MHz, 869.8MHz (EU)

Radio signal strength: up to 6 dBm

Distance: up to 50 meters outdoors, up to 30 meters indoors (depending on building materials)

Compatible Motor Type: Single Phase AC Motors

Necessary limit switches: electronic and mechanical

Active element: micro-gap relay switch μ

Power supply: 100V ~ 240V AC, 50 / 60Hz

Rated load current: 1.7A (inductive loads) / 4.2A (resistive loads)

Consumption: up to 0.8W

Operating temperature: 0 ° C ~ + 35 ° C

Relative humidity: 10% ~ 95% (non-condensing)

Dimensions: 42.5 (W) x 38.25 (H) x 20.3mm

To install in boxes: Ø≥50 mm, depth ≥60 mm

- FIBARO-003