Fibaro FGWDEU-111 Walli Dimmer FIBARO smart dimmer

Fibaro FGWDEU-111. Walli Dimmer FIBARO smart dimmer. Designed to control the light source through the Z-Wave network. It measures the active power and the energy consumed by the controlled load. Compatible load types: resistive loads (conventional incandescent and halogen light sources), resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED), resistive-inductive loads (ferromagnetic transformers). It can be installed in a two-wire and three-wire configuration. Automatically calibrate the connected light source. Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption. Works as a Z-Wave signal repeater (all non-battery powered devices within the network will act as repeaters to increase network reliability). Can be used with all Z-Wave Plus certified devices, including third-party devices Fgwdeu-111 eu fibaro walli dimmer.

Specifications

Radio protocol: Z-Wave (500 series chips)

Radio frequency: 868 ~ 868.6MHz, 869.7 ~ 870MHz

Radio signal strength: +6 dBm

Distance: up to 50 meters outdoors, up to 40 meters indoors (depending on building materials)

Active element: electronic semiconductor switch ε

Compatible load types: resistive loads (conventional incandescent and halogen light sources), resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED), resistive-inductive loads (ferromagnetic transformers)

Power supply: 110V ~ 230V AC, 50 / 60Hz

Operating temperature: 0 ° C ~ + 35 ° C

Relative humidity: 10% ~ 95% (non-condensing)

Dimensions: 86 (W) x 86 (H) x 51 mm

To install in boxes: Ø60 mm, depth ≥40 mm

- FIBARO-009