Vesta VESTA-BXS-R-W Dual dual PIR detector for lateral vision…

Vesta VESTA-BXS-R-W. Dual dual PIR detector for lateral vision outdoors. Includes VESTA-271 radio transmitter (TX-OPT-BXS-F1-868). Coverage of 12m on each side. It can be connected to a CCTV camera to send visual alarms. 4 detection zones (2 on each side). Adjustable detection range and sensitivity. Independent alarm outputs and tamper against sabotage. IP55. Self-powered with lithium or alkaline batteries 3V~9V DC or from a radio transmitter. Vesta-271 + optex-118.

Specifications

Outdoor Side View Dual Dual PIR Detector

Side vision with dual sensor on each side

(TX-OPT-BXS-F1-868)

Can be connected to a CCTV camera to send a visual alarm when an intruder is detected

4 PIR technology: detection range, sensitivity and alarm output can be set independently on each side

Coverage of 12 meters on each side

Angle with respect to the wall adjustable to 0° or 3°

2 detection zones on each side

Detection range adjustable in 5 levels (2.5/3.5/6/8.5/12 meters)

Mounting height of 0.8 ~ 1.2 meters

Adjustable sensitivity on each side (extremely high and normal)

SMDA (Super Multi-Dimension Analysis) processing logic against false alarms due to vegetation and adverse weather factors

Quick closing of the front cover, by pressure, and automatic walk test (3 minutes duration) when closing the cover

Right side alarm relay: NC/NA (10V DC, 0.01A, individual, right or general)

Left side alarm relay: NC/NA (10V DC, 0.01A, individual, left or general)

Fault/tamper output: NC/NO (10V DC, 0.01A)

Built-in rear tamper

Double conductive mesh protection

Built-in level for fast and accurate installation

Easy visual identification of all adjustment elements (marked in blue color on the detector)

Quick opening by turning the lower screw 90 degrees

Includes protected compartment at the back to house the radio transmitter

Degree of protection IP55

Operating temperature -30°C ~ +60°C

Powered by 3V~9V DC lithium or alkaline batteries (not included)

Compatible batteries: CR123A x3, 1/2AA x3 or x6, CR2 x3

(RBB-01)

It is recommended to power from the battery of the radio transmitter used

Maximum consumption: 8mA

Dimensions: 199.7 x 92.8 x 98.7mm