Fibaro FGCD-001 FIBARO CO Sensor

Fibaro FGCD-001. FIBARO CO Sensor. Z-Wave carbon monoxide detector. Ultralight, compact and battery powered. Equipped with a temperature sensor. Compatible with any Z-Wave or Z-Wave Plus Controller. Supports protected mode (Z-Wave network security mode) with AES-128 encryption. Designed to mount on the wall. Completely via radio. Built-in siren and LED diode. Fgcd-001 co sensor.

Specifications

Radio protocol: Z-Wave (500 series chip)

Radio frequency: 868.4MHz, 868.42MHz, 869.8MHz (EU)

Radio signal strength: up to -5 dBm (EIRP)

Distance: up to 50 meters outdoors, up to 40 meters indoors (depending on building materials)

CO measurement range: 0 ~ 450 ppm (parts per million)

Measurement accuracy: ± 10ppm / ± 5%

Siren sound power: 85 dBA at 3 meters

Default response times: 50 ppm 60-90 minutes, 100 ppm 10-40 minutes, 300 ppm <1.5 minutes

Power supply: 3V DC CR123A battery

Lifespan under typical conditions: 8 years

Operating temperature: 0 ° C ~ + 50 ° C

Relative humidity: 10% ~ 95% (non-condensing)

Dimensions: Ø65 x 28 (Al) mm

- FIBARO-007