- -35%
180° panoramic wireless PIR detector from the WX Shield series for outdoor use with active LED antimasking. Adjustable range up to 12m, 180°. Independent right and left side detection. Advanced SMDA processing logic. 14 pairs of horizontal detection zones and 2/4 vertical layers. Adjustable…
Optex WXS-RAM 180° panoramic wireless PIR detector from the WX…
WXS-RAM
€255.90
€393.69
35%
Tax included
180° panoramic wireless PIR detector from the WX Shield series for outdoor use with active LED antimasking. Adjustable range up to 12m, 180°. Independent right and left side detection. Advanced SMDA processing logic. 14 pairs of horizontal detection zones and 2/4 vertical layers. Adjustable…
Optex WXS-RAM. 180° panoramic wireless PIR detector from the WX Shield series for outdoor use with active LED antimasking. Adjustable range up to 12m, 180°. Independent right and left side detection. Advanced SMDA processing logic. 14 pairs of horizontal detection zones and 2/4 vertical layers. Adjustable left/right detection range and sensitivity. Left and right alarm outputs, fault/tamper output. IP55. Self-powered by lithium batteries. Wxs-ram.
The WX Shield series is OPTEX's new bet for sensors with 180-degree panoramic detection, with flexibility in the distance and configuration of the detection area, as well as the option of low mounting (0.8-1.2 m) or high mounting ( 2 m), IR self-learning logic and anti-masking. Ideal for perimeter protection or flat roofs in residential or commercial installations. The WXS sensor is equipped with all the benefits of the Shield sensor category including double conductive mesh housing to avoid false alarms due to interference or intense light, automatic test mode and 5 year warranty. WXS-AM is the wired model.
Flexible installation height
The WXS outdoor sensors offer high or low mounting options offering a flexible detection area of ??between 2.5 and 12 m. In the 2m high mount option, the volumetric detection area is 9m; high mounting is effective in preventing vandalism or lens masking.Two independent left/right detection areas
In low mount, the WXS intrusion sensors have two independent detection areas 90 degrees to the left and right. Each of these areas can be configured independently for detection distance, sensitivity and independent alarm output, which is very useful for activating security cameras.Screening analysis and animal immunity
WX Shield intrusion detection sensors are designed to be immune to pets and small animals, which means that the alarm is not activated by cats, dogs or birds, giving great stability to the detection area. In addition, the sensors have the multi-dimensional logic (SMDA) patented by OPTEX, which discards environmental changes such as vegetation, shade, etc. which gives great stability to the sensor.Characteristic
Up to 12 meters, 180°, outdoor PIR with anti-masking
4 PIR offering double left/right detection, with animal immunity
Low (0.8~1.2 meters) or high (2 meters) mounting option
Independent left/right detection and alarm output (ideal for CCTV)specs
180° panoramic wireless PIR detector for outdoor use
Antimasking by active LED
Includes protected rear compartment to house the radio transmitter
Compatible with most manufacturers of wireless transmitters (not included)
Detection Method: Passive Infrared
180° coverage angle
High mounting height: 2 meters
Low mounting height: 0.8 ~ 1.2 meters
14 pairs of horizontal detection zones and 2 vertical layers mounted between 0.8 and 1.2 meters high or 4 vertical layers mounted at 2 meters high
Fixed range of 9 meters mounted at 2 meters height
Adjustable range between 2.5 and 12 meters mounted between 0.8 and 1.2 meters high
Detection speed from 0.3 to 2 m/s
Sensitivity from 2°C to 0.6m/s adjustable for each side individually
Alarm period of 2.0 ± 1.0 sec.
Boot time of 60 seconds or less (once the LED lights up)
Digital IR anti-masking function self-learning function
Double conductive shield
Advanced SMDA (multidimensional analysis) processing logic
Right alarm relay: Individual, right or general, NC/NO selectable (solid state switch, 10V DC, 0.01A)
Left alarm relay: Individual, left or general, NC/NO selectable (solid state switch, 10V DC, 0.1A)
Fault output: NC (28V DC, 0.1A)
Tamper output: The tamper output is shared with the "TR" fault output.
Power: 3V ~ 3.6V DC (lithium batteries) /19 µA ~ 4 mA at 3V
Operating temperature -30°C ~ +60°C
Relative humidity up to 95%
Degree of protection IP55
Wall or pole mount
Includes bubble level to facilitate installation
Dimensions: 91.7 (W) x 201.5 (H) x 124.3 (D) mm
Weight: 730g- OPTEX-164
WXS-RAM
Summary
0
(0 Reviews)
Select a row below to filter reviews.
Only users who already bought the product can add review.
No customer reviews for the moment.