Network Cable RJ45 S/FTP Cat 6A Cu LSFH 2m Gray (Box 10 units) Televes

Preconnected data patch cord with RJ45 connector at each end. It is made of a Category-6A data cable, S/FTP type (foiled pairs and foiled cable), with a flexible copper inner conductor 26 AWG and outer sheath made of grey LSFH (Low Smoke Free of Halogen). 2m. Box 10 units

Highlights

• Category-6A data cable
• S/FTP Foiled FTP Cable (foiled pairs)
• Flexible copper inner conductor (26 AWG)
• Compatible with PoE/PoE+ (Power over Ethernet) technology, allowing the cable to power network devices

Main features

• PE (Polyethylene) copper conductor insulation, 1.1 mm diameter
• Aluminium+polyester shielding foil
• Aluminium outer shielding braid
• Grey LSFH (Low Smoke Free Of Halogen) outer sheath, 0.59 mm thick and 6.2 mm diameter
• 79% nominal speed
• RJ45 connectors with gold plated connector ends with shell nickel plated

Discover

Data cable category Cat 6A (augmented) has its origins on Cat 6 and it is backwards compatible, with the standards of the inferior categories (Cat 6/5e and Cat 3). Category 6A evolves over category 6, allowing to achieve transmission frequencies of up to 500 MHz (in each pair) and 10 Gbps of throughput. It includes characteristics and specifications to avoid crosstalk and noise. This type of data cable can be used in 10BASE-T, 100BASE-T, 1000BASE-T and 10GBASE-T compliant systems.

They are characterized for:

• Comply with TIA/EIA-568B.2-1
• Transfer rate up to 10Gbps
• Frequency range of up to 500 MHz
• Nominal impedance of 100 ohms
• Maximum resistance per conductor below 93,8 ohms/Km

The RJ45 is a connector commonly used in structured cable networks. With up to 8 connection pins, it is adequate both for data networks (8 pairs), as well as telephone networks (2 pairs). It is usually used in networks compliant with standards TIA/EIA-568-B.

Specifications