KIT TO IMPROVE 4G COVERAGE AND INTERNET SPEED IN ISOLATED FACILITIES

Three factors influence the reception of our 4G router: 4G repeater distance, terrain orography and facade material ... with this Televes kit (manufacturer nº1 in antennas) and TP-Link (Manufacturer nº1 in 4G routers) will improve us significantly the connection.

Apart we can use this kit in Ciudad as a "failover" connection so that our internet connection (cable, Fiber, adsl ...) when it falls, we could exit through the MR200 router having a WAN/LAN port that allows this double connection .

• Distance to 4G repeater

The 4G repeaters of telephone companies are usually located in the vicinity of cities and towns with a greater number of users. The further away we are from the emission towers, the lower the intensity of the mobile signal received, and the lower the coverage inside the houses. As we move further away from the transmitting antenna, the quality of the connections will decrease as well as the navigation speed. Keep in mind that the emission power of a new generation router does not reach more than 5-7 km.

• Orography of the land.

The mountains, as well as the trees act as a shield for the 4G/3G signal, for this reason, the houses surrounded by mountains in the lower part of a valley have coverage problems. The orography of the land plays a determining role; we can connect to an antenna located 7 kilometers away on a flat land, however if we are between mountains at 3 km we will probably lose the connection. The troughs, river channels and in general the lower areas receive less signal and therefore the coverage is lower.

• Material and thickness of the facade

The houses with thick facades or built with stones block the entrance of the mobile signal in the house, being necessary to bring the 4G router to the windows to receive coverage.

Kit composed of:

• 2 4G/LTE antennas 4G extended coverage Televes These coaxial cables have a length of 7,5m and SMA male connectors.

• TP-Link Archer MR600 AC1200 Wireless Dual Band 4G+ LTE Router

2 4G/LTE antennas 4G extended coverage Televes

Two 4G/LTE signals transmission and reception antennas, for extended coverage in shielded areas or in areas where propagation conditions are difficult. Both antennas are installed with a >0.5m separation for multiple transmission/reception and are connected directly to a 4G MIMO router.

A 50Ohm coaxial cable is included in each antenna. These coaxial cables have a length of 7,5m and SMA male connectors.

Highlights

• MIMO technology (Multiple Input, Multiple Output): provides greater quality and reliability of 4G/LTE signals in places of difficult reception and propagation
• Onmidirectional transmission/reception: pointing is not required
• Mobile 4G devices are more efficient in terms of power and consumption
• Optimized response on both the Uplink and the Downlink
• Passive antenna, no power consumption

Application example 

* see Attachments for more mounting information

Specifications

TP-Link Archer MR600 AC1200 Wireless Dual Band 4G+ LTE Router

Enjoy 4G+ Speed Sharing Everywhere

4G+ Cat6 AC1200 Wireless Dual Band Gigabit Router

Archer MR600

Features

• TP-Link's First 4G+ Router – supports 4G+ Cat6 to boost the data speeds of up to 300 Mbps*
• Full Gigabit Ports – provides reliable wired connections for bandwidth-intensive devices such as game consoles and STB
• Plug a SIM card and play – no configurations needed, compatibility of SIM cards in 100+ countries are assured by years of field tests
• Better Signal for Connections Everywhere – enjoy stable and efficient connections to every device thanks to the two external LTE antennas
• Wi-Fi router mode – plug an Ethernet cable into the LAN/WAN port for flexible access as a backup option if you can't get a 4G connection
• Supports TP-Link OneMeshTM – co-works with TP-Link OneMesh products to create a flexible and cost-efficient Mesh network

Boost Your 4G+ Speed

Supports the 4G+ Cat6, which used Carrier Aggregation technology to boost the data speeds of up to 300 Mbps. Plug your SIM card and enjoy HD movies without interruption, downloading files in seconds, and smooth online gaming.

Fully Gigabit Ports for Consummate Connectivity

Fully gigabit Ethernet ports provide warp speeds and reliable connections for high-intensive wired devices such as your smart TV, game console, NAS, and more.

Wi-Fi Where You Need It

Enjoy unmatched convenience and versatility. Tested in the field for years to ensure universal compatibility with 2 advanced LTE antennas to deliver a smooth connection. Simply plug in a micro SIM card and power on this elegant piece of technology to utilize fast and stable Wi-Fi, whether you’re at home or working remote.

• Lodging Home
• Remote Area
• Temporary Store
• Holiday Home

Got SIM Card? Then Plug and Play!

With an integrated 4G+ modem and a built-in SIM card slot, all you need to do is insert a micro SIM card and turn on the Router. Enjoying fast, stable Wi-Fi on a 4G+ network has never been easier.

Reliable Access for Up to 64 Devices Simultaneously

Easily share a 3G/4G connection with up to 64 wireless devices, such as phones, tablets, and laptops, at the same time. 4 LAN ports stand ready to provide internet for wired devices like desktop computers.

 Support TP-Link OneMesh™

Co-works with TP-Link OneMesh products, to provide a more flexible and cost-effective Mesh network with a single Wi-Fi name for seamless whole-home coverage.

*OneMesh Range Extender or Powerline Adapter sold separately.

Easy Setup and Management

Set up the Archer MR600 in minutes thanks to its intuitive web interface and the powerful Tether app. Tether also lets you manage its network settings from any Android or iOS device, including parental controls and access control.

*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.

Specifications