TP-LINK T2500G-10TS network switch Managed L2/L3/L4 Gigabit Ethernet (10/100/1000) 1U Black

What This Product Does
Designed for workgroups and departments, T2500G-10TS from TP-Link provides full set of layer 2 management features. It delivers maximum throughput where you need it — to high-performance workgroups at the edge of the network, or as a backbone for Gigabit switches and high-speed servers indemanding small networks. Moreover, T2500G-10TS switch also comes equipped with 2 SFP slots, giving you greater network flexibility.
T2500G-10TS is designed exclusively for the networking needs of growing businesses, with an extensive suite of management features and security functions available. These TP-Link products are cost-effective for small and medium-sized businesses, making them ideal networking solutions.

Abundant L2 Features
T2500G-10TS supports a complete lineup of L2 features, including 802.1Q VLAN, QinQ, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol and 802.3x Flow Control function. In addition, the switch provides advanced features for network maintenance, including LoopBack Detection and Cable Diagnostics. IGMP Snooping ensures intelligent forwarding of the multicast stream to only the appropriate subscribers, while IGMP throttling & filtering restricts each subscriber on a port level to prevent unauthorized multicast access.

Secure Networking
The T2500G-10TS provides IP-MAC-Port Binding, Port Security, Storm control and DHCP Snooping which protect against broadcast storms, ARP attacks, etc. It integrates some typical DoS attacks to select. You can protect these attacks more easily ever than before. In addition, the Access Control Lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports and even VLAN ID. Moreover, the switch supports 802.1X authentication, which is used in conjunction with a RADIUS server to require some authentication information before access to the network is allowed. Guest VLAN function supports to enable the non-802.1X clients to access the specific network resource.

Advanced QoS Features
To integrate voice, data and video service on one network, T2500G-10TS supports rich QoS policies. Administrator can designate the priority of the traffic based on a variety of means including Port Priority, 802.1p Priority and DSCP Priority, to ensure that voice and video are always clear, smooth and jitter free. In conjunction with the Voice VLAN the switch supports, the voice applications will operate with much smoother performance.

Enterprise Level Management Features
T2500G-10TS is easy to use and manage. It supports various user-friendly standard management features, such as intuitive web-based Graphical User Interface (GUI) or industry-standard Command Line Interface (CLI), either administration traffic can be protected through SSL or SSH encryptions. SNMP (v1/v2c/v3) and RMON support enables the switch to be polled for valuable status information and send traps on abnormal events. And it also supports Dual Image, which provides reduced down-time for the switches, when the image is being upgraded / downgraded.

TP-LINK T2500G-10TS. Switch type: Managed, Switch layer: L2/L3/L4. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 8, USB 2.0 ports quantity: 1, Console port: RJ-45. MAC address table: 8000 entries, Switching capacity: 20 Gbit/s. Networking standards: IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE.... Power connector: DC-in jack. Rack mounting, Form factor: 1U

Management features
Switch type	Managed
Switch layer	L2/L3/L4
Quality of Service (QoS) support	Y
Web-based management	Y
ARP inspection	Y
MIB support	RFC1213, RFC2233, RFC1643, RFC1493, RFC2674, RFC2819, RFC2021, RFC2620, RFC2618, RFC2925
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	8
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Gigabit Ethernet (copper) ports quantity	1
SFP module slots quantity	2
Console port	RJ-45
USB 2.0 ports quantity	1
Power connector	DC-in jack
Network
Networking standards	IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3az,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z
10G support	N
Copper ethernet cabling technology	10BASE-T,100BASE-TX,100BASE-T,1000BASE-TX
Cable types supported	Cat3,Cat4,Cat5,Cat5e,Cat6,Cat6a,Cat6e,Cat7
Port mirroring	Y
Flow control support	Y
Link aggregation	Y
Broadcast storm control	Y
Rate limiting	Y
Spanning tree protocol	Y
Head-of-line (HOL) blocking	Y
VLAN support	Y
Virtual LAN features	Private VLAN,Tagged VLAN
Data transmission
Switching capacity	20 Gbit/s
Throughput	14.9 Mpps
Forwarding rate	14.9 Mpps
MAC address table	8000 entries
Number of queues	4
Jumbo frames support	Y
Jumbo frames	10000
Packet buffer memory	0.5 MB
Security
DHCP features	DHCP client,DHCP server
Access Control List (ACL)	Y
IGMP snooping	Y
MAC address filtering	Y
SSH/SSL support	Y
Loop protection	Y
BPDU filtering/protection	Y
Multicast features
Multicast support	Y
Protocols
Management protocols	IPv6, SNMP v1/v2c/v3, RMON
Design
Rack mounting	Y
Form factor	1U
Product colour	Black
LED indicators	LAN, Power, WLAN
Power
Power supply included	Y
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	8.38 W
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	10 - 90%
Storage relative humidity (H-H)	5 - 90%
Weight & dimensions
Width	294 mm
Depth	180 mm
Height	44 mm
Packaging data
Cables included	AC
Quick start guide	Y
Package type	Box
Rack mount kit	Y