D-Link DGS-1520-28MP/E Switch 20xGbE PoE 2x10 SFP+
DGS-1520-28MP/E
€2,280.14
Tax included
Brand D-Link Model DGS-1520-28MP/E Hardware Features General - Hardware version: A1 - Size: Standard 19” rack width, 1U height - Interfaces: 20 x 10/100/1000BASE-T PoE 2 x 10GBASE-T 2 x 10G SFP+ - Port standards: IEEE 802.3 10BASE-T Ethernet (twisted pair copper) IEEE 802.3u 100BASE-TX Fast Ethernet (twisted pair copper) IEEE 802.3u 100BASE-FX 100 Mbps over fiber optics IEEE 802.3ab 1000BASE-T…
D-Link DGS-1520-28MP/E Switch 20xGbE PoE 2x10 SFP+
Brand | D-Link |
Model | DGS-1520-28MP/E |
Hardware Features | General - Hardware version: A1 - Size: Standard 19” rack width, 1U height - Interfaces: 20 x 10/100/1000BASE-T PoE 2 x 10GBASE-T 2 x 10G SFP+ - Port standards: IEEE 802.3 10BASE-T Ethernet (twisted pair copper) IEEE 802.3u 100BASE-TX Fast Ethernet (twisted pair copper) IEEE 802.3u 100BASE-FX 100 Mbps over fiber optics IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted pair copper) IEEE 802.3z 1000BASE-X 1 Gbps over fiber optics IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE 802.3x Flow Control IEEE 802.3ae 10 Gigabit Ethernet IEEE 802.3af/at - Multimedia interface exchange. Automatic or configurable MDI/MDIX - LED: Power/Stacking ID/Fan (per device) Link/Activity/Speed (per port 10/100/1000 Mbps, per port) PoE 2.5G, by Gigabit SFP port, by 10G SFP+ port) Performance - Switching capacity: 140 Gbps - Transmission method: Save and send - MAC Address Table: Up to 16,384 entries per device - Static MAC Addresses: Up to 512 static MAC entries - Maximum transmission speed: 104.16 Mbps PoE - PoE standard: IEEE802.3at, IEEE802.3af - PoE Power Budget: 370W, 740W (with RPS) Feeding - Power input: 100 to 240 V AC - Maximum power consumption: PoE enabled: 443.6 W PoE disabled: 45.2 W - Standby consumption: 37.3 W Physics - MTBF: 333946 hours - Acoustics: 57.1 dB(A) - Heat dissipation: 1545.8 BTU/h - Weight: 4.29 kg - Dimensions: 441 x 308.5 x 44 mm |
Software Features | L2 Features - MAC address table: 16,384 entries - Flow control: 802.3x Flow Control HOL blocking prevention - Up to 12,288 bytes - 802.1AX/802.3ad Link Aggregation: Max 32 groups per device, - 8 ports per group - Spanning Tree Protocols (STP) 802.1D STP 802.1w RSTP 802.1s MSTP BPDU filtering Root Guard Loop protection - Loopback detection - Port copy Supports One-to-One, Many-to-One Supports mirroring for Tx/Rx Supports 4 groups of mirroring - Flow mirroring Supports input mirroring only - VLAN mirroring - RSPAN - L2 protocol tunnel - Ring protection switching - Ethernet (ERPS) v1/v2 VLAN - VLAN Group: Max 4K VLAN groups Max. 1~4094 VID - GVRP: Max 4K dynamic VLAN groups - Dual VLAN (Q-in-Q): Port-based Q-in-Q - Selective Q-in-Q - 802.1Q - AutoSurveillance VLAN - Port-based VLAN - VLAN based on the 802.1v protocol - AutoVoice VLAN - MAC-based VLAN - Subnet-based VLAN - VLAN translation - VLAN Multicast (ISM VLAN for IPv4/IPv6) - Asymmetric VLAN - Private VLAN - VLAN trunking - Super VLAN Quality of Service (QoS) - 802.1p - 8 queues per port - Queue management: Strict priority Weighted Round Robin (WRR) Strict + WRR Weighted Round Robin Deficit (WDRR) - Congestion control: Weighted random early detection (WRED) 802.1Qbb Priority-Based Flow Control (PFC) [10G ports only] - Policy map: 802.1p Priority Observation IP/DSCP Priority Observation Speed limit Time-based QoS - Based on CoS: Switch port Indoor/outdoor VID 802.1p indoor/outdoor priority MAC address Ether type IP address DSCP ToS/IP Preference Protocol type TCP/UDP port IPv6 type traffic IPv6 Flow Label - Bandwidth control: Port-based (input/output, minimum granularity 8 Kbps) Flow-based (input/output, minimum granularity 8 Kbps) Bandwidth control per queue (min. 8 Kb/s granularity) - Three-color marker Minimum CIR/PIR granularity: 8 Kbps trTCM srTCM L3 Features - IPv4 ARP entries:8192 256 Static ARP - IPv6 entries ND:4096 128 static ND entries - IP interface Supports 16 interfaces - Free ARP - Loopback Interface - Proxy ARP Supports local ARP proxy - VRRP v2/v3 - IP Assistant Access Control List (ACL) - ACL based on: 802.1p priority VINE MAC address Ether type LLC VLAN IP address IP Preference/ToS DSCP Mask Protocol type TCP/UDP port number IPv6 type traffic IPv6 Flow Label - Time-based ACL - CPU interface filtering - Max ACL Entries: Input (hardware inputs): 1536 Output (hardware inputs): 512 VLAN Access Map Numbers: 2048 Safety features - Protection of ports Supports up to 64 MAC addresses per port - Broadcast/Multicast/Unicast Storm Control - Physical Stacking and L3 Static Routing - DHCP Server Screening - IP source protection - DHCP snooping - IPv6 Snooping - Dynamic ARP Inspection (DAI) - DHCPv6 Guard - IPv6 Route Advertisement (RA) Protection - IPv6 Inspection ND 1 - Duplicate Address Detection (DAD) - ARP Spoofing to prevent identity theft: Max. 64 entries - L3 control packet filtering - Unicast Reverse Path Forwarding (URPF) - Traffic segmentation - SSL: Compatible with TLS 1.0/1.1/1.2 Supports IPv4/IPv6 access - SSH Supports SSH v2 Supports IPv4/IPv6 access - Protection against BPDU attacks - DoS attack prevention AAA - Guest VLAN - 802.1X authentication Supports port/host based access control Identity-based policy assignment Dynamic VLAN Assignment - Web Access Control (WAC) Supports port/host based access control Identity-based policy assignment Dynamic VLAN Assignment - MAC-based access control (MAC) Supports port/host based access control Identity-based policy assignment Dynamic VLAN Assignment - RADIUS and TACACS+ authentication - Database Failover Authentication - Composite authentication - Privilege level for management access - Trusted Host - RADIUS/TACACS+ Accounting Network management - Web-like GUI Supports IPv4/IPv6 access Supports SSL (HTTPS) - Command Line Interface (CLI), Full CLI - Telnet server/client for IPv4/IPv6 - TFTP client for IPv4/IPv6 - DNS client for IPv4/IPv6 - Secure FTP client/server for IPv4/IPv6 - SNMP Supports v1/v2c/v3 Supports IPv4/IPv6 access - SNMP Traps - System log for IPv4/IPv6S Syslog server - sFlow - Multiple images and configurations - RMON v1: Supports 1, 2, 3, 9 groups - RMON v2: Compatible with ProbeConfig group - LLDP/LLDP-MED - BootP/DHCP client - Automatic DHCP configuration/ - automatic image - Local DHCP/DHCPv6 Relay - DHCP Relay Option 60/61/62/125 - Flash file system - D-Link Discover Protocol (DDP) - Debug command - Compatible with IPv4/v6 SNTP server - NTPv3/v4 - Encryption/password recovery - DHCP Server Support for IPv4/IPv6 address assignment - Command log - MTP - DHCPv6 Prefix Delegation (PD) - Ping/Traceroute for IPv4/IPv6 - Microsoft Network Load Balancing (NLB) - Active PD (PoE models only) - Zero Touch Provisioning (ZTP) |
Revision Date | 12-04-2023 by RTY |
Summary
0
(0 Reviews)
Select a row below to filter reviews.
Only users who already bought the product can add review.
No customer reviews for the moment.