High gain mast amplifier (one UHF channel) 3 UHF (channel) inputs-UHF-VHFmix Televes
Mast installation amplifier to amplify terrestrial television signals from several antennas. It consists of 3 inputs with UHF band amplification and a single additional UHF channel (on demand), in addition to VHF mixing. The amplifier is powered at 24Vdc through the coaxial output cable. Televes 535340
Mast installation amplifier to amplify terrestrial television signals from several antennas.
It consists of 3 inputs with UHF band amplification and a single additional UHF channel (on demand), in addition to VHF mixing. The amplifier is powered at 24Vdc through the coaxial output cable.
Stands out for
- Separate amplification of each band
- High gain manual adjustment
- EasyF connection system
- Fully automated manufacturing and subjected to rigorous quality controls
- High armor chassis, manufactured in Zamak
Features
- LTE/4G filter to eliminate telephony interference
- ON/OFF switches to allow the passage of DC towards the UHF inputs, to feed a BOSS system
- Simple assembly Flange for attachment to the mast included
- Orange orange plastic ABS case for outdoor installation
EasyF connection system: simplicity and savings
The EasyF is an innovative concept of connecting the internal conductor of the coaxial cable (live), which is inserted directly into the device increasing the reliability of the connection. In addition, thanks to the absence of "F" connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.
- Real time saving: accelerating the installation is possible, since it is not necessary to make the connectorization of the coaxial cables.
- In addition, the threading process of the connectors in the device is avoided, which sometimes gets complicated when the space is not enough
- Reliability of connection: the flange that holds the cables prevents the coax from coming loose
- Economical savings: no additional connector (or "F" or "CEI") is needed
- Optimization of the space: the entrances and exits are always located on the same side of the device, avoiding to bend the coaxial cables and facilitating the work inside cabinets and registers
- Very simple assembly in three steps: only it is required to screw and unscrew the covers to connect two cables:
1. Unscrew the lid of the device to access the connection
2. Insert the pre-stripped coaxial cables
3. Close the cover and screw in to secure the connection
Discover more about the reliability of the EasyF system
With EasyF, the connection of the coaxial cable in the device is made by an automated system of insertion of the live (internal conductor) by contact, without requiring welding.
- Like the first day: the life time of the device increases when eliminating the possible deterioration of the welds with the passage of time
- Reduction of the failure rate: generally produced by cold welding
- Optimization of electromagnetic behavior: at high frequencies
- Reinforcement of our commitment to the environment: the contamination caused by the welding process is eliminated and the electricity consumption in production is reduced
Specifications
Reference | 535340 | ||||
Inputs / Bands | VHF | UHF | UHF (1C) | SAT | |
Frequency range | MHz | 47-254 | 470-790 | channel (1) | 950-2150 |
Gain | dB | -1.5 | -5 | 32 | -2 |
Output level DIN45004B | dBμV | - | - | 114 | - |
Gain regulation range | dB | - | - | 25 | - |
Noise figure | dB | - | - | 2.8 | - |
Power Supply | Vdc | 12...24/50 | |||
Current consumption | mA | 40 | |||
Máx. current inputs (2) |
mA | - | 40 | - | 350 |
Protection index | IP | 23 | |||
Dimensions (Wide x High x Prof) | mm | 120 x 130 x 40 |
1 - Specify channel in the order.
2 - Automatic detection.
Summary
0
(0 Reviews)
Select a row below to filter reviews.
No customer reviews for the moment.