Central broadband MiniKom EasyF 4 inputs: FM-VHF-UHF-FI LTE700 Televes

Configurable headend amplifier for SMATV systems with separate amplification that guarantees the absence of intermodulation between inputs.

It consists of 4 inputs: FM-VHF-UHF-FI, the VHF and UHF ones have two selectable gain margins while the FM input has a single amplifier stage. In the IF stage, it incorporates a switch for the selection of the LNB power supply in local mode (through the source itself) or remotely (through an external STB).

It incorporates anti-LTE700 filtering and a signal indicator LED at the output for the immediate detection of network failures.

Stands out for

• Very compact size (103x103x 50mm)
• LEDs indicating the existence of signal in output and power supply
• Configurable gain via switch (high/low) and high output level
• Two amplification stages for TV bands
• Switching power supply that guarantees low consumption
• EasyF connection system
• High armor chassis, made of Zamak

Main features

• Test output (-30dB)
• Intuitive front cover, with settings and block diagram
• LNB power selection switch: local or remote
• ON/OFF switch for DC pass through the VHF and UHF inputs, for powering preamplifiers or BOSS systems
• screwable on the wall

Discover

EasyF connection system: simplicity and savings

The EasyF is an innovative connection concept of the internal conductor of the coaxial cable (live), which is inserted directly into the device, increasing the reliability of the connection. In addition, thanks to the absence of "F" connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.

• Real time savings: it is possible to speed up the installation, since it is not necessary to carry out the connectorization of the coaxial cables. In addition, the threading process of the connectors on the device, which is sometimes complicated when the space is not enough, is avoided.
• Reliability of connection: the clamp that holds the cables prevents the coaxial from coming loose
• Cost savings: no additional connector (neither "F" nor "IEC") needed
• Space optimization: inputs and outputs are always located on the same side of the device, avoiding bending coaxial cables and facilitating work inside cabinets and registers
• Very simple assembly in three steps: only screwing and unscrewing of the covers is required to connect two cables:

1. Unscrew the cover of the device to access the connection

2. Insert the previously stripped coaxial cables

3. Close the lid and screw to secure the connection

Find out more about the reliability of the EasyF system

With EasyF, the connection of the coaxial cable to the device is carried out by means of an automated system for inserting the live (internal conductor) by contact, without requiring soldering.

• Like the first day: the lifetime of the device is increased by eliminating the possible deterioration of the welds over time
• Reduced failure rate: generally caused by cold welds
• Optimization of electromagnetic behaviour: at high frequencies
• Reinforcement of our commitment to the environment: pollution caused by the welding process is eliminated and electricity consumption in production is reduced

Why choose an amplifier with LTE790/700 switchable?

The anti-LTE filtering switch integrated in Televes amplifiers allows selecting the appropriate internal filter between channels 60 (790Mhz) or 48 (694MHz), adapting to the DTT channeling frequencies of the region, in such a way that it completely rejects the type of signal LTE that may interfere with the product.

This functionality offers the versatility to maintain an installation free of interference in all LTE situations, covering filtering needs in any territory with a single amplifier, before, during and after the transition period. In addition to this, it simplifies the logistics of the installation, only requiring the switching of the filter to adapt it to the Digital Dividend that operates in the region, and also allowing it to adapt to the contingencies that may occur in the execution of the dividend, in the form of delays or advances in planning.

Specifications