MiniKom EasyF broadband multiband amplifier 5 inputs: FM-VHF-UHF-21..35-39..48 LTE700 Televes

MiniKom EasyF broadband multiband amplifier

5 inputs: FM-VHF-UHF-21..35-39..48

Configurable headend multiband amplifier for MATV systems with separate amplification that guarantees the absence of intermodulation among inputs.

Equipped with 5 inputs: FM-VHF-UHF-21...35-39....48. The UHF band is divided in 2 of the inputs, which is useful in two-repeater reception installations since it allows an appropriate filtering of the channels for each of them. The VHF and UHF inputs have both selectable gain margins, whereas the FM input has a single amplifying stage.

Equipped with a LTE700 filter, and an output LED signal indicator for immediate network failure detection.

Stands out for

• Very compact size (103x103x 50mm)
• LEDs indicating the existence of signal in output and power supply
• Configurable gain via switch (high/low) and high output level
• Two amplification stages for TV bands
• Switching power supply that guarantees low consumption
• EasyF connection system
• High armor chassis, made of Zamak

Main features

• Test output (-30dB)
• Intuitive front cover, with settings and block diagram
• LNB power selection switch: local or remote
• ON/OFF switch for DC pass through the VHF and UHF inputs, for powering preamplifiers or BOSS systems
• screwable on the wall

Discover

EasyF connection system: simplicity and savings

The EasyF is an innovative connection concept of the internal conductor of the coaxial cable (live), which is inserted directly into the device, increasing the reliability of the connection. In addition, thanks to the absence of "F" connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.

• Real time savings: it is possible to speed up the installation, since it is not necessary to carry out the connectorization of the coaxial cables. In addition, the threading process of the connectors on the device, which is sometimes complicated when the space is not enough, is avoided.
• Reliability of connection: the clamp that holds the cables prevents the coaxial from coming loose
• Cost savings: no additional connector (neither "F" nor "IEC") needed
• Space optimization: inputs and outputs are always located on the same side of the device, avoiding bending coaxial cables and facilitating work inside cabinets and registers
• Very simple assembly in three steps: only screwing and unscrewing of the covers is required to connect two cables:

1. Unscrew the cover of the device to access the connection

2. Insert the previously stripped coaxial cables

3. Close the lid and screw to secure the connection

Find out more about the reliability of the EasyF system

With EasyF, the connection of the coaxial cable to the device is carried out by means of an automated system for inserting the live (internal conductor) by contact, without requiring soldering.

• Like the first day: the lifetime of the device is increased by eliminating the possible deterioration of the welds over time
• Reduced failure rate: generally caused by cold welds
• Optimization of electromagnetic behaviour: at high frequencies
• Reinforcement of our commitment to the environment: pollution caused by the welding process is eliminated and electricity consumption in production is reduced

Specifications