PicoKom 1e/(2s+TV) Home Amplifier EasyF: 47-694MHz G 10/16dB Vs 98/101dBμV + TV Output + Power Televes

Stands out for

• Plug&Play, without adjustments: it incorporates automatic gain regulation, without affecting the quality of the signal
• Aesthetic and reduced size design: installable in 100x100mm junction boxes
• EasyF connection system
• High performance integrated switching power supply: reduced consumption (40% less than a standard amplifier)
• Fully automated manufacturing and subject to rigorous quality controls

Characteristic

• DC pass-through ON/OFF switch, for powering preamplifiers or BOSS systems
• Easy assembly, maintaining the minimum bending radius of coaxial cables
• screwable on the wall

EasyF connection system: simplicity and savings

The EasyF is an innovative connection concept of the internal conductor of the coaxial cable (live), which is inserted directly into the device, increasing the reliability of the connection. In addition, thanks to the absence of "F" connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.

• Real time savings: it is possible to speed up the installation, since it is not necessary to carry out the connectorization of the coaxial cables. In addition, the threading process of the connectors on the device, which is sometimes complicated when the space is not enough, is avoided.
• Reliability of connection: the clamp that holds the cables prevents the coaxial from coming loose
• Cost savings: no additional connector (neither "F" nor "IEC") needed
• Space optimization: inputs and outputs are always located on the same side of the device, avoiding bending coaxial cables and facilitating work inside cabinets and registers
• Very simple assembly in three steps: only screwing and unscrewing of the covers is required to connect two cables:

1. Unscrew the cover of the device to access the connection

2. Insert the previously stripped coaxial cables

3. Close the lid and screw to secure the connection

Find out more about the reliability of the EasyF system

With EasyF, the connection of the coaxial cable to the device is carried out by means of an automated system for inserting the live (internal conductor) by contact, without requiring soldering.

• Like the first day: the lifetime of the device is increased by eliminating the possible deterioration of the welds over time
• Reduced failure rate: generally caused by cold welds
• Optimization of electromagnetic behaviour: at high frequencies
• Reinforcement of our commitment to the environment: pollution caused by the welding process is eliminated and electricity consumption in production is reduced

Specifications