This Triple Feed LNB is a monoblock LNBF for Ku-band satellite reception from orbital positions 13˚E, 16˚E and 19.2˚E in Central European countries.
LNB Inverto Single Triplefeed 23mm, 13ºE + 16ºE + 19.2ºE for 90cm dish
inverto-5068
€34.99
Tax included
This Triple Feed LNB is a monoblock LNBF for Ku-band satellite reception from orbital positions 13˚E, 16˚E and 19.2˚E in Central European countries.
- Read reviews
This Triple Feed LNB is a monoblock LNBF for Ku-band satellite reception from orbital positions 13˚E, 16˚E and 19.2˚E in Central European countries. It is intended to be installed with commercially available satellite dishes that have the following characteristics:
- 85cm wide parabolic offset reflector
- 40mm feed clamp with ~7mm profile (the LNB will be supplied with 40mm ring adaptor)
- F/D = 0.6
It features a frequency range of 10.7 to 12.75GHz divided into Low Band (10.70 to 11.70GHz) and High Band (11.70 to 12.75GHz). It receives waves with horizontal and vertical polarization. The LNB provides one switchable IF outputs (Single model). The output carries also power supply and control signals. Output port is F type. DiSEqC1.0 commands allow switching the output to a particular band and orbital position.
The DiSEqC ODU allocation is the following: "ODU A" corresponds to 16E, "ODU B" to 13E and "ODU C" to 19.2E. As long as no DiSEqC command has been received, the selected orbital position is 16E (ie DiSEqC A). The LNB comprises three feeds, one for each orbital position. The feeds allow mounting into the feed clamp of the satellite dish. The feeds will be marked with “13˚E”, “16˚E” and “19.2˚E” respectively.
The DISEqC positions (A/B/C) and the respective orbital positions (16E/13E/19.2E) are marked on the LNB housing. The LNB is supplied with 40mm plastic ring adapter.
- Hotbird 13º East - Eutelsat 16º East - Astra 19.2º East
Main Features
- Low Phase Noise, DVB-S2 (HDTV) compliant
- Low Noise Figure (0.2 dB)
- Low Power Consumption
- Very high Cross Polarization Isolation
- Very high Frequency Stability
Specifications
| New ref. | 5068 |
| Old ref. | IDLM-SINM20-TRPMN-8PP |
| Low Band Input Frequency Range | 10.7 ~ 11.7 GHz |
| O/P Frequency Range | 950 ~ 1950 MHz |
| LO Frequency | 9.75 GHz |
| Noise Figure | 1.0(max) dB |
| High Band Input Frequency Range | 11.7 ~ 12.75 GHz |
| O/P Frequency Range | 1100 ~ 2150 MHz |
| LO Frequency | 10.6 GHz |
| Noise Figure | 1.0(max) dB |
| LO Initial Accuracy | ± 1.0 MHz |
| LO Temperature Drift | ± 3.0 MHz |
| LO Phase Noise @ 1K Hz | -55 dBc / Hz |
| LO Phase Noise @ 10K Hz | -80 dBc / Hz |
| LO Phase Noise @ 100K Hz | -100 dBc / Hz |
| Conversion Gain | 50 ~ 62 dB |
| Gain Variation | 6 [max] dB |
| Output 1 dB Compression Point | 0.0 [min.] dBm |
| Crosstalk Isolation | 20 (min)dB |
| Output VSWR | 2.5 : 1~ |
| Output Spurious (inter-modulation) | -55 [max] dBm |
| DC Power | 10~20/150 [ max.] DCV/mA |
| Working Temperature | - 30 ~ + 60 °C |
| Output Impedance | 75 Ω |
| Polarity , Band & Satellite Selection V, L, 16°E | 13V, 0kHz, DiSEqC1.0: Sat A |
| Polarity , Band & Satellite Selection V, H, 16°E | 13V, 22kHz, DiSEqC1.0: Sat A |
| Polarity , Band & Satellite Selection H, L, 16°E | 18V, 0kHz, DiSEqC1.0: Sat A |
| Polarity , Band & Satellite Selection H, H, 16°E | 18V, 22kHz, DiSEqC1.0: Sat A |
| Polarity , Band & Satellite Selection V, L, 13°E | 13V, 0kHz, DiSEqC1.0: Sat B |
| Polarity , Band & Satellite Selection V, H, 13°E | 13V, 22kHz, DiSEqC1.0: Sat B |
| Polarity , Band & Satellite Selection H, L, 13°E | 18V, 0kHz, DiSEqC1.0: Sat B |
| Polarity , Band & Satellite Selection H, H, 13°E | 18V, 22kHz, DiSEqC1.0: Sat B |
| Polarity , Band & Satellite Selection V, L, 19.2°E | 13V, 0kHz, DiSEqC1.0: Sat C |
| Polarity , Band & Satellite Selection V, H, 19.2°E | 13V, 22kHz, DiSEqC1.0: Sat C |
| Polarity , Band & Satellite Selection H, L, 19.2°E | 18V, 0kHz, DiSEqC1.0: Sat C |
| Polarity , Band & Satellite Selection H, H, 19.2°E | 18V, 22kHz, DiSEqC1.0: Sat C |
inverto-5068
Data sheet
- Outputs
- Single
- Type
- Monoblock
Summary
3
(2 Reviews)
Select a row below to filter reviews.
Only users who already bought the product can add review.
Buen producto, y buen fuencionamiento
Hola hoy me acaba de llegar este lnb triple lnb de inverto, aunque su uso es para el hotbird, eutelsat 16 y astra 19, yo lo use para el badr 26 al este como foco principal, y los dos laterales para cojer el astra 23,5 por un lado y por el otro el astra 28, aqui en canarias el haz para el sur de europa y el badr para el norte de africa, cumple su funcion y los transpondedores entran fuertes de los tres satelites con una parabolica de 1 metro, muy contento con la compra, gracias.
a shit product
They sell the lnb, but they don't say that it doesn't support any universal satellite.
Nor do they provide proper support for lnb, either together with the purchase of lnb, or separately,
Anyway, a company with shit support.