Pack 5 units Cabelcon Green F Male 4-5 mm compression connector for mini coaxial cables

High quality Cabelcon Quickmount compression connector for coaxial mini HEC CommScope and similar mini coaxial cables.

The pin integrated in the plug ensures the best contact in the F sockets even with a small diameter of the cable's inner conductor. Indoor use (not waterproof).

Technical specifications

• Certificates: class A, EN 50083

• Impedance: 75 ohms
• Installation temperature: -5 ° to + 50 ° C
• Material: NiTin
• Max. tensile strength - short term: 260 N
• Operating temperature: -40 ° to + 100 ° C

Fits cables with the following diameters:

Outer conductor: 3.6 - 4.4 mm
Jacket: 4.9-5.4 mm

• All Cabelcon CX3 RG6 / 59 compression pliers for connectors can be used
• Effortless Simple Installation - No need to put a tube under the braid anymore.
• Place of use: indoor. The plug is not waterproof.
• Safe contact in F sockets thanks to the plug principle:

connector F has its own inner conductor. This is countersunk in the F connector in the state of delivery. When inserting the stripped wire, the F connector pin is pushed out through the inner wire in the correct position; At the same time, the inner conductor of the cable is fixed by contact clips. This ensures reliable contact in an F socket even with internal conductors with a diameter of less than 0.6mm, and it is also easy to see when the wire has been pushed far enough into the socket.

When installing, always note: on QuickMount sockets, the braid must not be rejected. Also, all protective sheeting over the braid should be removed.

Examples of suitable cable types:

• Kathrein LCD 89
• Belden H121
• Coaxial Draka 11 AD 08
• WISI MK 76A