EasyF 2D 5-2400MHz 4.3/4dB mini-splitter with outdoor enclosure Televes

Blister, includes box (televes-417801) for outdoor installation and a 2-way mini distributor and EasyF connection system, for SMATV signals. Its size allows it to be installed anywhere. In addition, miniturization is also applied to the electronics that it incorporates and that improves its electrical behavior and reduces the effect of impulsive noise.

Stands out for

• EasyF connection system: ease of installation and savings in assembly
• Made of Zamak, great armor
• High reliability: automated manufacturing with state-of-the-art microcomponents

Main features

• Improved step losses
• Good electrical behavior: reduction of impulse noise
• Includes grounding screw
• DC pass from outputs to input
• Dimensions (57x46x11mm)

Discover

EasyF connection system: simplicity and savings

The EasyF is an innovative concept of connection of the internal conductor of the coaxial (live) cable, which is inserted directly into the device increasing the reliability of the connection. In addition, thanks to the absence of "F" connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.

• Real time savings: speeding up the installation is possible, as it is not necessary to make the connectorization of the coaxial cables. In addition, the process of threading the connectors on the device is avoided, which is sometimes complicated when space is not enough.
• Connection reliability: the cable tie that holds the cables prevents the coax from loosening
• Cost savings: no additional connector (neither "F" nor "CEI") is required
• Space optimization: inputs and outputs are always located on the same side of the device, avoiding bending the coaxial cables and facilitating work inside cabinets and registers
• Very simple assembly in three steps: it is only necessary to screw and unscrew the covers to connect two cables:

1. Unscrew the cover of the device to access the connection

2. Insert the previously stripped coaxial cables

3. Close the cover and screw to secure the connection

Find out more about the reliability of the EasyF system

With EasyF, the connection of the coaxial cable in the device is carried out by means of an automated system of insertion of the live (internal conductor) by contact, without requiring soldering.

• Like the first day: the life of the device increases by eliminating the possible deterioration of the welds with the passage of time
• Reduced failure rate: generally caused by cold welding
• Optimization of electromagnetic behavior: at high frequencies
• Reinforcement of our commitment to the environment: pollution caused by the welding process is eliminated and electricity consumption in production is reduced

specs