Mini-diverter 5-2400MHz connector EasyF 2 outputs 25dB type C Televes

2-lead mini tapper and EasyF connection system, for SMATV signals. Due to its bypass losses (25dB), it is recommended to be installed on floors 7 to 12 (type C).
Its innovative ultra-reduced size allows its installation anywhere, including records of small dimensions. In addition, miniturization is also applied in the electronics that it incorporates and that improves its electrical behavior and reduces the effect of impulsive noise.
It is an indoor installation, but it is also suitable for outdoor use always inside a chest (ref 417801).

Stands out for

• EasyF connection system: ease of installation and savings in assembly
• Made in Zamak, great armor
• High reliability: automated manufacturing with last generation microcomponents

Features

• Improvement of step losses
• Good electrical behavior: impulsive noise reduction
• Includes grounding screw
• Bidirectional DC step between the entrance and the exit of step
   

EasyF connection system: simplicity and savings

The EasyF is an innovative concept of connecting the internal conductor of the coaxial cable (live), which is inserted directly into the device increasing the reliability of the connection. In addition, thanks to the absence of "F" connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.

• Real time saving: accelerating the installation is possible, since it is not necessary to make the connectorization of the coaxial cables. In addition, the threading process of the connectors in the device is avoided, which sometimes gets complicated when the space is not enough
• Reliability of connection: the flange that holds the cables prevents the coax from coming loose
• Economical savings: no additional connector (or "F" or "CEI") is needed
• Optimization of the space: the entrances and exits are always located on the same side of the device, avoiding to bend the coaxial cables and facilitating the work inside cabinets and registers
• Very simple assembly in three steps: only it is required to screw and unscrew the covers to connect two cables:

1. Unscrew the lid of the device to access the connection

2. Insert the pre-stripped coaxial cables

3. Close the cover and screw in to secure the connection

Discover more about the reliability of the EasyF system

With EasyF, the connection of the coaxial cable in the device is made by an automated system of insertion of the live (internal conductor) by contact, without requiring welding.

• Like the first day: the life time of the device increases when eliminating the possible deterioration of the welds with the passage of time
• Reduction of the failure rate: generally produced by cold welding
• Optimization of electromagnetic behavior: at high frequencies
• Reinforcement of our commitment to the environment: the contamination caused by the welding process is eliminated and the electricity consumption in production is reduced

Specifications