- -49%
IDLU-UWT110-CUO1O-32P is a small format Unicable2 multiswitch that allows installations with up to 32 satellite receivers in a single cable based on digital channel stacking technology. The digital channel stacking technology applies digital signal processing after analog to digital broadband converters.
Inverto Unicable 2 Programmable cascade multiswitch with 32 UBs, 4 Universal / Wideband satellite inputs and 1 Terr. input
inverto-5294
€55.59
€109.00
49%
Tax included
IDLU-UWT110-CUO1O-32P is a small format Unicable2 multiswitch that allows installations with up to 32 satellite receivers in a single cable based on digital channel stacking technology. The digital channel stacking technology applies digital signal processing after analog to digital broadband converters.
The IDLU-UWT110-CUO1O-32P is a small form factor Unicable2 multiswitch enabling installations with up to 32 satellite receivers over a single cable based on digital channel stacking technology. Digital channel stacking technology applies digital signal processing after wideband Analog to Digital converters (full band capture) to select and reorder transponder channels.
The multiswitch supports both Dynamic and Static modes. In Dynamic mode (default), up to 32 EN50607-compatible receivers (or up to 16 EN50494-compatible) connected over the Unicable output ports, can select their desired transponder and receive it over the respective User Band. In Static mode, the multiswitch outputs a fixed transponder-to-IF frequency mapping and can line up to 32 transponders (depending on the bandwidth of the desired transponders) over its Unicable output ports. This allows for an unlimited number of receivers to be connected to the switch making MDU installations substantially cheaper and simpler than ever before.
This multiswitch has 4 satellite inputs that can receive (and cascade) either 4 universal satellite IF bands (LV, LH, HV and HH) from one satellite feed, or 2 wideband satellite IF signals (Horizontal and Vertical) from two satellite feeds. A unique feature of the multiswitch firmware allows to daisy chain two units and combine their outputs with external combiner to support connection of up to 4 wideband satellite IF signals from up to four satellite feeds. It also has a Terrestrial VHF/UHF input. The terrestrial signals are combined over both output ports of the multiswitch.
The Terrestrial signal is not amplified. The multiswitch has two outputs - by default, one of the ports is configured to function as a Unicable port in dynamic mode and the second is configured to function as Universal (Legacy) and switches to Unicable as soon as it receives an EN50494 or EN50607 command. The operating mode and configuration of each output port - unicable/universal, dynamic/static - output power level, channel bandwidth, UB numbers and protocol, center frequencies and the functionality of each of the output ports are fully programmable through Inverto’s Unicable II Programmer device and PC software tool.
The multiswitch is powered over the supplied AC/DC adapter and power inserter device allowing greater flexibility in various installation scenarios. The communication protocol between the multiswitch unit and the connected receivers is based on EN50494 and/or EN50607 and can be defined per User Band allowing operators to support installations consisting of both EN50494-only and EN50607-compatible Next Generation PVRs and HGWs.
Specifications
| Inverto | IDLU-UWT110-CUO1O-32P |
| Frequency range: satellite | Quattro LNB: 950 MHz ~ 2150 MHz (default) Wideband LNB: 300 MHz ~2350 MHz |
| Frequency range: terrestrial | 47 MHz ~ 862 MHz |
| Inputs | 4x IF inputs: - for 1x Quattro LNB (default) - or 2x Wideband LNBs 1x UHF/VHF input for terrestrial antenna |
| Outputs | 4x Loopthrough satellite IF outputs 1x Loopthrough terrestrial output 1x Unicable II (dCSS/EN50607) output, dynamic (default) or statis mode, supporting up to 32 UBs. With combined terrestrial signal. 1x Universal (Legacy) by default upon power up, auto switch to Unicable II™ upon receiving EN50494/EN50607 command. With combined terrestrial signal |
| Input power range | -50 dBm ~ -15 dBm |
| Output signal level (AGC) | Configurable (default -25 dBm) |
| RF isolation: satellite/terretsrial (input) | 25 dB min. |
| RF isolation: satellite/satellite (input) | 25 dB min. |
| RF isolation: satellite ch/ch (UBs, output) | 28 dB min. |
| Loop-through loss: satellite | 3 dB max. |
| Loop-through loss: terrestrial | 3 dB max. |
| Gain: Unicable II™ (dCSS) output (out of AGC) | 25 dB min. |
| Gain: legacy (universal) output | 10 dB min. |
| LO phase noise @ 1 kHz | -80 dBc/Hz max. |
| LO phase noise @ 10 kHz | -92 dBc/Hz max. |
| LO phase noise @ 100 kHz | -96 dBc/Hz max. |
| LO phase noise @ 1 MHz | -104 dBc/Hz max. |
| Integrated phase noise | 1.5° max. |
| Control protocols | DiSEqC 1.x/DiSEqC 2.0, EN50494/EN50607 |
| Legacy port switching | V/L => 13 V/0 kHz , V/H =>13 V/22 kHz H/L => 18 V/0 kHz , H/H => 18 V/22 kHz |
| Input/Output impedance | 75 Ω (F-type) |
| LNB power supply | 300 mA max. @ 13 VDC ~ 18 VDC |
| Power consumption | 500 mA @ 13 VDC max. |
| Working temperature | -20 °C ~ +60 °C |
| IP protection | IP54 |
| Product dimensions (W x D x H) | 11.35 cm x 11.05 cm x 20.8 cm |
| Weight | 165 g |
| Unicable II™ (dCSS) port specifications | |
|---|---|
| User band (channel) bandwidth | Configurable, 10 MHz ~ 80 MHz (default 30MHz) |
| User band (channel) gain ripple | 3 dB max. |
| User band (channel) frequencies | Configurable; Default 32 User bands: |
| CH1: 1210MHz (EN50494+EN50607) | |
| CH2: 1420MHz (EN50494+EN50607) | |
| CH3: 1680MHz (EN50494+EN50607) | |
| CH4: 2040MHz (EN50494+EN50607) | |
| CH5: 984MHz (EN50494+EN50607) | |
| CH6: 1020MHz (EN50494+EN50607) | |
| CH7: 1056MHz (EN50494+EN50607) | |
| CH8: 1092MHz (EN50494+EN50607) | |
| CH9: 1128MHz (EN50607) | |
| CH10: 1164MHz (EN50607) | |
| CH11: 1256MHz (EN50607) | |
| CH12: 1292MHz (EN50607) | |
| CH13: 1328MHz (EN50607) | |
| CH14: 1364MHz (EN50607) | |
| CH15: 1458MHz (EN50607) | |
| CH16: 1530MHz (EN50607) | |
| CH17: 1530MHz (EN50607) | |
| CH18: 1566MHz (EN50607) | |
| CH19: 1602MHz (EN50607) | |
| CH20: 1638MHz (EN50607) | |
| CH21: 1716MHz (EN50607) | |
| CH22: 1752MHz (EN50607) | |
| CH23: 1788MHz (EN50607) | |
| CH24: 1824MHz (EN50607) | |
| CH25: 1860MHz (EN50607) | |
| CH26: 1896MHz (EN50607) | |
| CH27: 1932MHz (EN50607) | |
| CH28: 1968MHz (EN50607) | |
| CH29: 2004MHz (EN50607) | |
| CH30: 2076MHz (EN50607) | |
| CH31: 2112MHz (EN50607) | |
| CH32: 2148MHz (EN50607) | |
inverto-5294
Summary
0
(0 Reviews)
Select a row below to filter reviews.
Only users who already bought the product can add review.
No customer reviews for the moment.