Fermax 2812 LOCK RELEASE MOD.410AD-412-L22 MAX

There are several types of lock release mechanisms, it depends on the TYPE OF OPERATION that is needed.

TYPE A-412_AUTOMATIC 12Vdc:

• A-412 (Automatic Operation and activation at 12 Vdc): the lock-release unlocks automatically when it receives a 12Vdc voltage impulse. The lock release locks again once the power is no longer supplied and the door opens and closes mechanically. For a correct installation, the automatic latch must be pressed about 3mm by the door latch once it is closed.

Reversible (DIN Right or DIN Left).

It allows opening both to the right and to the left.

Symmetrical.

It allows you to change hands while maintaining the symmetry of the body.

DIN STANDARD

The DIN STANDARD establishes the opening direction of the door and names the type of lock release installed.

Looking at the door from the side where the hinges are visible:

If the hinges are to the left of the observer, it is a Left DIN lock release.

If the hinges are to the right of the observer, it is a Right DIN lock release.

SERIES 410

This lock release is made up of a 410 series electrical mechanism, whose dimensions are:

67(V)x16.4(H)mmx28(D)mm.

Recommended for replacement. The lock release includes the mechanism with a front width of 16.5mm.

It is installed in small aluminum and PVC profiles.

It includes a RADIAL bolt that allows the bolt to rotate on its own axis without having to make a side cut in the door frame, which is not possible in lock releases with a traditional bolt.

Its standard version offers MAX adjustable latch, which allows adjustment between the latch and the slip of 1mm, in the installation process.

Includes:

MAX ADJUSTABLE LATCH:

The lock release includes an adjustable latch, allowing an exact fit between the latch and the striker, with a margin of 4mm. Allows the door leaf not to press the bolt of the lock release.

Embed.

The embeddable electric lock release is a device that is installed in the door frame to control its opening from a remote location using an electrical device. In an electronic door entry installation, it is possible to activate the door opener at the entrance to the building and allow visitor access from the home telephone or monitor by pressing the door opener "key" button. A embeddable lock release is made up of an electrical mechanism and an armature.

R UNLOCK

The lock release includes a manual release lever, which inhibits its operation, allowing free access.

Embedded armor Type L22.

For doors with bolt entry.

Metal trim type L22 that, together with an electrical mechanism, forms a embeddable lock release. Recommended for small-sized aluminum and PVC profiles as it has a smaller width than the standard.

Dimensions: 22(H)x250(V)mm.

Technical specifications

Consumption:

N, A 12Vac: 980mA

N-412 12Vdc: 400mA.

N-512 12Vdc: 200mA.

Dimensions:

67(V)mmx16.5(H)mmx28(D)mm