Fermax 2829 MECHANISM MOD.500N

There are several types of lock release mechanisms, it depends on the TYPE OF OPERATION that is needed.

TYPE N_NORMAL 12Vac:

• N (Normal Operation and activation at 12 Vac): the lock release unlocks during the time that a 12 Vac voltage is applied to it.

The electric MECHANISM is a device that is installed in the door frame to control its opening from a remote location using an electrical device. In an electronic door entry installation, it is possible to activate the building entrance mechanism and allow visitor access from the home telephone or monitor by pressing the door opener "key" button. A lock release is made up of an electrical mechanism and an armor or cover depending on whether it is built-in or surface-mounted.

Reversible (DIN Right or DIN Left).

It allows opening both to the right and to the left.

Symmetrical.

It allows you to change hands while maintaining the symmetry of the body.

DIN STANDARD

The DIN STANDARD establishes the opening direction of the door and names the type of lock release installed.

Looking at the door from the side where the hinges are visible:

If the hinges are to the left of the observer, it is a Left DIN lock release.

If the hinges are to the right of the observer, it is a Right DIN lock release.

500 SERIES

500 series electric mechanism, with a reinforced steel latch that can withstand impacts of up to 800kg. Its dimensions are:

-75(V)mmx21(H)mmx28(D)mm

Recommended for wrought iron, iron or steel doors, with a high traffic in the access. Includes a cable outlet that facilitates installation by simply splicing to the connector

Technical specifications

Consumption:

N, A 12Vac: 980mA

N-412 12Vdc: 400mA.

N-424 24Vdc: 180mA.

N-512 12Vdc: 200mA.

N-524 24Vdc: 120mA.

Dimensions:

75(V)mmx21(H)mmx28(D)mm