Fermax 67521 UNIVERSAL LOCK RELEASE 990A-P22 12-24V MAX

Embed.

The embeddable electric lock release is a device that is installed in the door frame to control its opening from a remote location using an electrical device. In an electronic door entry installation, it is possible to activate the door opener at the entrance to the building and allow visitor access from the home telephone or monitor by pressing the door opener "key" button. A embeddable lock release is made up of an electrical mechanism and an armature.

Reversible (DIN Right or DIN Left).

It allows opening both to the right and to the left.

Symmetrical.

It allows you to change hands while maintaining the symmetry of the body.

DIN STANDARD

The DIN STANDARD establishes the opening direction of the door and names the type of lock release installed.

Looking at the door from the side where the hinges are visible:

If the hinges are to the left of the observer, it is a Left DIN lock release.

If the hinges are to the right of the observer, it is a Right DIN lock release.

There are several types of lock release mechanisms, it depends on the TYPE OF OPERATION that is needed.

TYPE A_AUTOMATIC MULTIVOLTAGE 12-24Vac/dc:

• A (Automatic Operation and activation at 10-24Vac/dc): the lock-release unlocks automatically when it receives a voltage impulse of 10-24Vac/dc. The lock release locks again once the power is no longer supplied and the door opens and closes mechanically. For a correct installation, the automatic latch must be pressed about 3mm by the door latch once it is closed.

MAX ADJUSTABLE LATCH:

The lock release includes an adjustable latch, allowing an exact fit between the latch and the striker, with a margin of 4mm. Allows the door leaf not to press the bolt of the lock release.

Embedded armor Type P22.

For access doors.

P22-type gray metallic trim that, together with an electrical mechanism, forms a embeddable lock release. Recommended for small aluminum and PVC profiles.

Dimensions: 22(H)x130(V) mm.

Technical specifications

Consumption: A_MULTIVOLTAGE 10-24V: 12Vac:250mA, 12Vdc:250mA, 24Vac: 500mA, 24Vdc:560mA

Dimensions: 66(V) x 16(H) x 25.5(D)mm.

MAX adjustment: 2mm

Holding force: 330Kg-f/3230N

Temperature: -15ºC to +40ºC

Cycles tested: 400,000