Fermax 3038 LOCK RELEASE 300A-412-S

Embed.

The embeddable electric lock release is a device that is installed in the door frame to control its opening from a remote location using an electrical device. In an electronic door entry installation, it is possible to activate the door opener at the entrance to the building and allow visitor access from the home telephone or monitor by pressing the door opener "key" button. A embeddable lock release is made up of an electrical mechanism and an armature.

SERIES 300

This lock release is made up of a 300 series electrical mechanism, whose dimensions are:

90(V)x20(H)mmx28(P)mm, when supplied in the MAX version it allows a latch adjustment of up to 4mm.

Recessed in wooden or metal frames. They are characterized by their more robust design and their low consumption in direct current.

Includes:

Reversible (DIN Right or DIN Left).

It allows opening both to the right and to the left.

Not symmetrical.

It allows changing hands but taking into account that the body is not symmetrical when changing from DIN RIGHT to DIN LEFT.

DIN STANDARD

The DIN STANDARD establishes the opening direction of the door and names the type of lock release installed.

Looking at the door from the side where the hinges are visible:

If the hinges are to the left of the observer, it is a Left DIN lock release.

If the hinges are to the right of the observer, it is a Right DIN lock release.

There are several types of lock release mechanisms, it depends on the TYPE OF OPERATION that is needed.

TYPE A-412_AUTOMATIC 12Vdc:

• A-412 (Automatic Operation and activation at 12 Vdc): the lock-release unlocks automatically when it receives a 12Vdc voltage impulse. The lock release locks again once the power is no longer supplied and the door opens and closes mechanically. For a correct installation, the automatic latch must be pressed about 3mm by the door latch once it is closed.

Type S embeddable armor.

For access doors.

Type S gray metallic trim that, together with an electrical mechanism, forms a embeddable lock release.

Dimensions: 25(H)x160(V) mm.