Auta 700205 Complete Visualtech compact phone

Digital phone. It can be installed in any Auta Visualtech 3-wire system.

Features

• Measurements 79 (w) x 217 (h) x 50 (d) mm
• DING DONG function (house bell)
• Surface mount
• External functions (lights, garage, etc ...)
• Call volume selection
• HD AUDIO system
• Melody selection
• Auto-ignition function
• Selection number of rings
• MULTI-FUNCTION status led

Functioning

call and talk

When a call is received from the entrance panel, the telephone begins to ring for a maximum time of 30 seconds. As standard, it makes 4 rings with 4-second intervals between each of them. During the call period, the user can open directly, pressing the button, or pick up the handset to establish a conversation. The conversation has a maximum of 90 seconds. If you want to continue with the conversation, you must press the button.

auto start

By pressing the button the user will be able to establish communication with the ENTRANCE PANEL. In the case of having more than one entrance panel in the installation, the system will perform auto-ignition on the last one from which a call has been received. Once communication is established, an opening can be made by pressing the button

call to concierge

If, while the telephone is idle, the handset is picked up and the button is pressed, a call will be made to the concierge center. If the system does not have a control panel installed, the telephone will issue an error message.

call volume adjustment

To adjust the volume of the call, insert a paper clip or similar through the indicated hole and press lightly. The phone has two volume levels (MEDIUM and HIGH)

melody selection

To select a ring melody, lift the handset and press the on-hook switch with your finger. With it pressed, a clip or similar must be inserted into the indicated hole by pressing gently. Each press selects a different melody from 8 available.

ding dong function

The telephone allows you to dispense with the internal bell of the house, thus integrating the two calls (exterior panel and house) in a single device. These calls will be automatically differentiated with different melodies and flashes. To have this function, all you have to do is connect the push button of the interior house to the telephone.

external functions

The telephone has 1 independent pushbutton that allow auxiliary maneuvers, such as operating garage doors, turning on lights, watering, etc ...

For this, an Auta auxiliary relay will be used connected to the maneuvering circuit to be controlled.