The RESISTANT PROXIMITY KIT includes a vandal-resistant proximity reader, with a narrow profile and small dimensions, allowing it to be installed on doors with a narrow profile.

It allows to manage up to 1,000 users thanks to the MINI autonomous external controller (ref.5276). This controller includes two MASTERS cards (HIGH/LOW) and an IR infrared keyboard for card and parameter programming, 3 proximity cards (ref.52750), 2 key rings (ref.52740) and a 12Vdc/2A power supply. (ref.4813).

MINI controller:

• 2A relay output. By default, it supplies 12Vdc between the GND, NO terminals. By changing some internal jumpers it becomes a dry contact. Configurable from 1-99 s. (5s by default) or bistable (when presenting the card, the relay is activated and when presenting it again, it is deactivated).

• Exit button input. GND, OPEN. The controller allows up to 2 different types of access when installing a proximity reader.

• Card only

• Multicard. By presenting 2 to 9 valid cards, the door will open. Multi-card type access requires several identifiers. For example, if it is programmed with 3 identifiers, in order to activate the door, the user will present his valid card and until the two additional cards are passed (example of the guards), the door will not open.

Each user is associated with an identifier number called ID (from 1 to 999). This ID allows you to cancel a lost or stolen card, so it is important to make a list, assigning each user the corresponding ID.

The controller is supplied with two master cards that allow registering or deleting cards or key rings. This kit can be expanded with a second proximity reader (ref.5296) that will act on the same relay in the kit.

ACCESSORIES

Ref. 1076 MAGNETIC CONTACT. Door sensor..

Ref. 5296 RESISTANT PROXIMITY READER.

Ref. 5287 BUILT-IN PUSHBUTTON

Ref. 5288 SURFACE PUSH BUTTON

Ref. 67501 UNIV. LOCK RELEASE 990N-P22 10-24V MAX (Normal Duty Short Armature Lock Release with Adjustable Latch)

Ref. 4813 POWER SUPPLY 12Vdc/2A

Technical specifications

MECHANICAL CHARACTERISTICS

APPEARANCE Steel

Surface fixing system. hidden screws.

IP66/IK9

DIMENSIONS Surface mounting (48(H) x 103(V) x 20(P) mm.

TECHNICAL CHARACTERISTICS

Power supply: Autonomous 12 Vdc (9-24Vdc)

Standby consumption: 12Vdc / 25mA

Operating temperature: [-20ºC, +60ºC]

Humidity: [10%, 95%]

Compatibility: EM (125KHz), MIFARE (13.56MHz) and HID (ISOProxII, 125KHz) cards/keychains

Wiegand 26 proximity protocol.

RF radiated power: 125KHz: 4.382dBuA/m, 13.56MHz: 2.02dBuA/m.

TECHNICAL SPECIFICATIONS

STAND-ALONE WIRING (with external controller ref. 5276) +DC (Red): 12Vdc supply positive GND (Black): 12Vdc supply negative D0 (Green), D1 (White): Wiegand 26 connection. LED (Brown): LED control BZ ( Yellow): Acoustic signal.