Fermax 5238 RESISTANT MEMOKEY KIT

The MEMOKEY RESISTANT KIT, for autonomous anti-vandal access control by keyboard and proximity, allows the management of up to 600 users.

It includes an IP66/IK9 keypad with an integrated controller with a narrow profile and small dimensions (ref.5293), 3 proximity cards (ref.52750), 2 key rings (ref.52740) and a 12Vac/1A power supply (ref. 4802).

Dispose of:

• 2A relay output configurable from 1-99s (5s by default) or bistable (when the card is presented, the relay is activated and when it is presented again, it is deactivated).

• Open door sensor input.

• Exit button input.

• Alarm Output- (negative output that allows activating a relay ref.2013).

This keyboard allows up to 4 different types of access:

• Card only.

• Card+PIN.

• Card or PIN (default).

• Multicard, PIN. Presenting 2 to 9 valid cards or pins will open the door.

The access code is entered by dialing 4 to 6 digits + #.

Multicard/PIN type access requires several identifiers. For example, if it is programmed with 3 identifiers, in order to activate the door, the user will present his valid card and until the two additional cards are passed (example of the guards), the door will not open.

Each user is associated with an identifier number called ID (from 1 to 600).

Users with ID (1 to 598) are standard users, presenting a valid card or code will open the door.

Users with ID (599 and 600) are panic users. These users, upon presenting their valid card or code, open the door and simultaneously activate the Alarm- auxiliary output for 1 minute or until a valid card or PIN is presented.

The keypad has a door sensor input (can be enabled or disabled). If it is activated and the door is opened without previous authorization, the alarm will go off until a valid identifier is presented and the door is closed. It will also activate the alarm, if the door is left open for more than 1 minute, after a valid access.

The keypad is supplied with two master cards that allow registering or deleting cards or key rings, not codes. The codes are registered through the keyboard itself.

The kit can be expanded with a second keypad (ref.5293) or with a WG26 proximity reader (ref.5296), adding an additional 12Vdc source (ref.4813):

• The keypad can function as INTERLOCK (opening of one door with automatic locking of another).

• The reader (ref.5296) will act on the door itself.

ACCESSORIES

Ref. 1076 MAGNETIC CONTACT. Door sensor.

Ref. 5296 RESISTANT PROXIMITY READER

Ref. 5293 KEYPAD W/PROX RESISTANT

Ref. 5287 BUILT-IN PUSHBUTTON

Ref. 5288 SURFACE PUSH BUTTON

Ref. 4813 POWER SUPPLY 12Vdc/2A

Ref. 67501 UNIV. LOCK RELEASE 990N-P22 10-24V MAX

(Normal Duty Short Armature Lock Release with Adjustable Latch)

Ref. 4813 POWER SUPPLY 12Vdc/2A

Technical specifications

MECHANICAL CHARACTERISTICS

APPEARANCE

Steel.

Surface fixing system.

hidden screws.

IP66 /IK09

DIMENSIONS

Surface mount (55(H) x 147(V) x 20(P) mm.

TECHNICAL CHARACTERISTICS

Power: 12Vac

Operating temperature: [-20ºC, +60ºC]

Humidity: [10%, 90%]

Compatibility: EM (125KHz), MIFARE (13.56MHz) and HID (ISOProxII, 125KHz) cards/keychains.

Configurable in Wiegand 26 proximity protocol and 8-bit burst keyboard format.

Relay (stand-alone) 2A (C, No, Nc)

RF radiated power: 125KHz: 4.382dBuA/m, 13.56MHz: 2.02dBuA/m.

TECHNICAL SPECIFICATIONS

AUTONOMOUS WIRING

~ (Red): Positive supply 12~28Vca/dc

~- (Grey&black): Negative supply 12~28Vca/dc

C (White&black), NO (Blue), NC (Green&black): Potential free relay. C_common, NO_Normally open, NC_Normally closed.

GND (Black), SP (Brown): door sensor

GND (Black), BS (Yellow): hall exit button

Alarm- (Gray), ~(Red): alarm output <200mA