Fermax 5296 PROX READER RESISTANT WG

Vandal resistant proximity reader, narrow profile and small dimensions.

It allows working in autonomous or centralized mode, depending on the Wiegand 26 controller to which it is connected.

STANDALONE MODE WITH EXTERNAL CONTROLLER REF. 5276

Maximum capacity of up to 1,000 users.

MINI controller:

2A relay output. By default, it supplies 12Vdc between the GND, NO terminals. By changing some internal jumpers it becomes a dry contact. Configurable from 1-99 (5s by default) or bistable (when presenting the card the relay is activated and when presenting it again it is deactivated).

- Exit button input. GND, OPEN.

The controller allows up to 2 different types of access when installing a proximity reader.

card only

Multi-card: When presenting between 2 and 9 valid cards, the door will open. The Multicard access type allows the user to always be accompanied. For example, if the controller is programmed with 3 identifiers, in order to activate the door, the user will present his valid card and until two additional valid cards are presented (for example, those of the guards) the door will not open.

Each user is associated with an identifier number called ID (1-999). Users with ID (1-999) are standard users who upon presentation of a valid card will open the door.

The controller is supplied with two master cards that allow registering or deleting cards or key rings.

CENTRALIZED MODE WITH EXTERNAL CONTROLLER

To access the user database on a PC or allow access to more than 1,000 people, this Wiegand 26 proximity reader can be directly connected to a controller so that it can be installed in a centralized system such as AC+, AC-MAX and IP AXES which will allow you to have a record of inputs and outputs knowing time, user and access.

ACCESSORIES

Ref. 1076 MAGNETIC CONTACT. Door sensor.

Ref. 5287 BUILT-IN PUSHBUTTON

Ref. 5288 SURFACE PUSH BUTTON

Ref. 67501 UNIV. LOCK RELEASE 990N-P22 10-24V MAX (Normal Duty Short Armature Lock Release with Adjustable Latch)

Ref. 4813 POWER SUPPLY 12Vdc/2A

Ref. 4802 POWER SUPPLY 12Vac/1A

Technical specifications

MECHANICAL CHARACTERISTICS APPEARANCE Aluminum 3 mm Surface fixing system.

hidden screws.

IP66

DIMENSIONS Surface mounting (48(H) x 103(V) x 20(P) mm.

TECHNICAL CHARACTERISTICS

Feeding:

Autonomous 12 Vdc (9-24Vdc)

Centralized: 12Vdc.

Standby consumption: 12Vdc / 25mA

Operating temperature: [-20ºC, +60ºC]

Humidity: [10%, 95%]

Compatibility: EM (125KHz), MIFARE (13.56MHz) and HID (ISOProxII, 125KHz) cards/keychains

Wiegand 26 proximity protocol. RF radiated power: 125KHz: 4.382dBuA/m, 13.56MHz: 2.02dBuA/m.

TECHNICAL SPECIFICATIONS

STANDALONE WIRING (with external controller ref. 5276)

+DC (Red): Positive 12Vdc supply

GND (Black): Negative 12Vdc supply

D0 (Green), D1 (White): Wiegand 26 connection.

LED (Brown): Control LED

BZ (Yellow): Acoustic signal.

CENTRALIZED WIRING:

+ (Red): Positive 12Vdc supply

(Black): Negative 12Vdc supply

DT, DO (Green), CK,D1 (White)

G (Brown): LED control.

Buzz (Yellow): Acoustic signal.