Fermax 7461 WG MIFARE/EM V SKYLINE PROXIMITY READER

Reader that allows the door to be opened by bringing a multi-frequency proximity card or key fob (EM (125KHz), MIFARE (13.56MHz) and HID (125KHz, ISOProxII) closer. Only authorized cards or key fobs will activate the device. It is not necessary physical contact Acoustic confirmation of acceptance or rejection of the card or key fob presented Access control module, to be incorporated into SKYLINE and CITYLINE door entry/video entry panels Recommended for indoors and outdoors The readers are Wiegand 26, allowing to equip to the access control installation of an anti-sabotage security, since it does not incorporate the door opening mechanism or the exit button connection.These functions are supported by the door controller that uses the Wiegand 26 protocol and therefore are left out from the scope of tampering The door controller will be installed inside (safe area) and the reader outside.

Configuration as STANDALONE:

* Capacity for up to 1,000 user cards or key rings.

* It requires a door controller (ref. 5276) for its connection and operation.

* 12Vdc power supply. AUTONOMOUS Technical Characteristics:

It does not require physical reader-card contact. Reading distance 5 cm (card) or 1.5 cm (keychain).

- Acoustic information of actions.

Very easy manual programming. Through MASTER HIGH and MASTER LOW cards.

- Autonomous controller (Ref.5276) with 1 relay output.

Lock release activation by relay with programmable time. Programmable 1 to 99 sec. Autonomous Programming

It can be done in 2 ways: By Master Cards. IR programming keyboard included with the controller. It is recommended to install the controller in the same embedding box or just behind the installed wall, since programming by IR keyboard will be easier, since the programmer requires direct vision of the controller. Configuration as CENTRALIZED:

*Proximity reader with capacity for up to: 1,020 user cards/key rings with the MDS Central Unit (ref. 2405). 2,048 user cards/keychains with the AC Plus Central Unit (ref. 4410).

* It requires a door controller (ref. 4420) for its connection and operation.

Technical Characteristics CENTRALIZED

It does not require physical reader-card contact. Reading distance 5 cm (card) or 1.5 cm (keychain).

Acoustic information of actions.

The reader can be used with other door controllers that use Wiegand 26 (WG) protocols.

Wiring: 5 wires to the door controller. Centralized Programming Programming is done from the PC software corresponding to the installed Central Unit (ref. 2405 or ref. 4410).

- For more information, see Technical Characteristics of the door controller.

ACCESSORIES

Ref. 5276 MINI STANDALONE CONTROLLER

Ref. 4420 CENTRALIZED DOOR CONTROLLER.

Ref. 4410 CENTRAL UNIT AC+ (DIN10)

Ref. 2405 MDS CENTRAL UNIT (DIN10)

Ref. 67501 UNIV. LOCK RELEASE 990N-P22 10-24V MAX (Normal Duty Short Armature Lock Release with Adjustable Latch)

Ref. 4813 POWER SUPPLY 12Vdc/2A

Technical specifications

MECHANICAL CHARACTERISTICS

APPEARANCE

Module to integrate in SKYLINE or CITYLINE panels.

Environmental protection (IP): 52 Shock protection (IK): 07

DIMENSIONS

Dimensions V (HxVxD mm): 105.2 x 47.5 x 15-20

TECHNICAL CHARACTERISTICS

Feeding:

Autonomous 12 Vdc

Centralized: 12Vdc.

Standby consumption: 12Vdc / 35mA

Operating temperature: [-15ºC, +55ºC]

Compatibility: EM (125KHz), MIFARE (13.56MHz) and HID (ISOProxII, 125KHz) cards/keychains

Wiegand 26 proximity protocol.

RF radiated power: 125KHz: 4.382dBuA/m, 13.56MHz: 2.02dBuA/m.