Fermax 55281 MARINE VID DUOX PLUS DIG ST3+ PROX PANEL

Installed at the entrances to the building, they allow communication with the dwellings, door opening, concierge calls, etc.

It incorporates a WIDE ANGLE COLOR camera with integrated lighting and a regulation system for the camera focus. Adjusting the camera image can be done in different ways:

Through the voice-assisted configuration that includes the amplifier module itself.

Temporarily connecting a keyboard (ref. 7439).

Through the locally connected DUOX Programmer.

The Duox Plus display module allows the search and visualization of the list of neighbors (electronic directory) using the navigation buttons (arrow keys), in addition to informing about the communication status.

The house call can be made in two ways:

by entering the corresponding code assigned to the dwelling + the "bell" key.

by searching the user's electronic directory (navigation buttons) and once found by pressing the "bell" key.

The navigation buttons also allow you to move through the programming menu.

It includes a proximity reader that allows the door to be opened by bringing a proximity card or key fob, similar to a credit card. Only authorized cards will activate the device. No physical contact is necessary.

Marine plate.

MARINE is the Fermax IP65 IK09 vandal resistant panel. It is made of 2.5mm thick stainless steel. AISI 316L steel type.

Marine is the perfect choice to install in places with extreme climatic conditions or in dangerous environments, humid or corrosive climates.

Marine panels do not include the embedding or surface box. This must be requested separately. The surface plates include a protection visor.

It is possible to combine two or more plates, as long as they are from the same series. To fit them perfectly, a set of spacers must be used for every two plates that are installed between their embedding boxes.

Steel colour.

Dial pad.

System: DUOX PLUS (2 digital wires)

Technical specifications

DIGITAL panels have a backlit keypad and a 3.5" electronic directory to call homes.

The call to the apartment is made by entering the corresponding code assigned to the apartment + the «bell» key.

Electronic directory: allows the search of the names (owners of the houses...) through the display and the navigation buttons.

Access Control: through the numerical keyboard, it incorporates access control functions through keyboard codes (previously programmed). The keypad allows up to 10,000 codes to open the door.

Radio frequency module (proximity card and key fob reader):

Frequency: 125kHz

Peak power: 572Nw

Video:

Sensor: 1/3" color CMOS.

Effective pixels > 340K. (camera captures 720x480)

Minimum external illumination: 0 lux. Since it has LEDs, no additional lighting is required.

Y/N >45dB.

Frame rate 25 fps.

Resolution > 368x288 pixels.

Video Codec: H264 Highline Profile

auto iris

Auto BLC.

Viewing angle 100º horizontal, 80º vertical.

Fisheye correction.

Color night vision through white leds.

Pan & Tilt digital zoom.

Technical Specifications Display:

Size: 3.5 inches

Format: 4:3

Resolution: 320 x 240 pixels

Colors: 262,000

Contrast Ratio: 500/1

Viewing direction: 12 o'clock

Luminance (cd/m2): 400 nits

Viewing Angle: 160H/160V

Backlight: 6 LED diodes

Directory capacity: 10,000 users.

Supply voltage (via CN1):

5 V input (pin 1) with a tolerance of 5%.

PWR input: 12 Vdc + 5% (DUOX)

Total consumption: 88 mA +10% (STANDBY); 134 mA +10% (TFT ON)

Operating temperature: -25ºC, 70ºC

Relative humidity: 5% - 95%

Compatible with V 11.12 audio and V 11.12.12 video amplifiers

Measure Module Display.

W module: 105.2x95 mm (width-height).

Backlit Duox display, 3.5" high luminosity TFT for outdoors that facilitates and enhances the panel's possibilities.

Integrated ONE-TO-ONE functions.

Image display.

Display of custom messages

Directory keys and possibility of using the keyboard as alphanumeric.

Indication of Date and Time.

Combination with pushbutton panels (max. 8 pushbuttons).

Possibility of connecting readers with Wiegand-26 protocol and Data Clock

Management from PC and connection through RS-485.

ST3+ Series Board

Plate measurements: 150x420 mm (width-height).

Embedded box measurements: 130x400x55 mm (width-height-depth).

Surface box measurements (with visor): 154x423x96 mm (width-height-depth).

Visor measurements: 154x420x40 mm (width-height-depth).

Power supply: 18-24 Vdc

Consumption:

Standby: 260mA.

active audio: 580 mA.

IP65 IK09

Audio power house-street direction: 2W

Audio power street-house direction: 0.15W

Adjustable volume in both directions

Operating temperature: -25 to 70 ºC