Fermax 3260 2S MINI VIDEO DISTRIBUTOR

The Mini Video Distributor is designed to be located in mechanism boxes or in areas with little space, especially in video door entry audio replacement installations, such as ADS without coaxial (VDS).

Its fundamental characteristic is that it takes up very little space and fastens wiring up to 1.5 mm2 in section.

It is not advisable for installations with coaxial cable since it is difficult to fasten.

Allows plant derivation of the video signal (VDS).

It includes the possibility of putting or removing the final load to adapt the impedance of the line.

In addition, there is the option of always leaving the distributor powered by means of a 18Vdc voltage from the VDS feeder or by means of the Ct signal of the monitors to which it distributes the video signal, working in the latter case only when one of the monitors is active.

Technical specifications

Power supply:+:10 -18 Vdc.

CT: control output to activate the camera or other devices, feed the «+» terminal of the distributor through the Ct of the monitor

Active consumption: 25 mA

Output impedance selectable with Jumper JP1: 75 ohms.

Video input: 0.8-1.6 Vpp

Output attenuation: 0.8 dB

Bandwidth: 8MHz

Body size: 44x44x16 mm