DIN-6 rail format to facilitate installation inside an electrical equipment box, or they can be screwed directly onto the wall.

It is used to feed the different equipment of a Fermax facility.

Built in VO self-extinguishing material.

They include a set of covers to protect the connection terminals.

The source cannot be connected directly to the bus, given the characteristics of the Bus 2 or DUOX Systems, since power and data go through the same wires. This requires the Connections Module.

The Power Supply Connection Module must be connected directly to the bus with the shortest cable distance possible.

This module prevents the power supply from disturbing the operation of the rest of the signals that circulate through the system and will also be the one that allows connecting more sources if the system requires it.

Technical specifications

It has two operation indicator LEDs:

Led ON on: indicates that the feeder is working.

OVERLOAD led on: indicates maximum current exceeded (it will be necessary to reduce the installation load or add additional power supply/s).

ON+OVERLOAD led blinking: indicates short circuit.

Feeding:

BUS 2 system: 24 Vdc

DUOX system: 18 Vdc

Output current depends on the connected source. Sources up to 3.5 A.

Input voltage BUS 2 system: 24 Vdc.

Input voltage DUOX System: 18 Vdc.