Fermax 9454 IP CAMERA/DUOX PLUS INTERFACE

Allows the integration of IP video CCTV cameras in a DUOX PLUS installation.

It transforms the IP video signal (RTSP standard protocol) into a DUOX PLUS signal that is connected directly to the DUOX PLUS bus.

Generally, an interface will be required for each camera installed in the DUOX PLUS installation. However, in the particular case of 2 cameras in the same Block, up to 2 cameras can be configured in the same interface (in this case a PoE switch will be necessary).

Each camera will be powered externally with its additional power supply (ref. 9982+ref. 9984) or through a PoE switch.

The interface will be powered directly from the DUOX PLUS bus.

Configurable by Wi-Fi, from the mobile through an embedded webserver.

An entrance panel can be associated to the interface, in such a way that, while the IP camera is being viewed, the opening of said associated entrance panel can be activated.

NOTE: It is not possible to have a visualization of the IP camera and at the same time have audio from a panel.

AUTO-ON OPERATION with Interface installed.

At rest, press “camera button” on the monitor to auto-start with different panels / cameras. Pressing sequentially, the display is:

Plate 0 or Chamber 0 of the block itself (one or the other).

Plate 1 or Chamber 1 of the block itself (one or the other).

Plate 0 or Chamber 0 of the General Entrance (one or the other).

Technical specifications

TECHNICAL CHARACTERISTICS

supply voltage

18Vdc

24Vdc

Consumption at rest

140mA (max)

104mA (max)

active consumption

153mA (max)

110mA (max)

Operating temperature

10ºC

+55ºC

Humidity (non-condensing)

5%

90%