Fermax 55282 MARINE VIDEO DUOX PLUS DIG DESFIRE PLATE

Installed at the entrances to the building, they allow communication with the homes, opening the door, calling the concierge, etc.

It incorporates WIDE ANGLE COLOR camera with integrated lighting and adjustment system for camera focus. Adjusting the camera image can be done in different ways:

Through the voice-assisted configuration that includes the amplifier module itself.

Temporarily connecting a keyboard (ref. 7439).

Through the locally connected DUOX Programmer.

The Duox Plus display module allows searching and viewing the list of neighbors (electronic directory) using the navigation buttons (arrow keys), in addition to reporting on the status of the communication.

The call to the home can be made in two ways:

by entering the corresponding code assigned to the home + the "bell" key.

by searching the user's electronic directory (navigation buttons) and once found by pressing the "bell" key.

The navigation buttons also allow you to move through the programming menu.

It includes a proximity reader that allows the door to be opened by bringing a proximity card or keychain close to it, similar to a credit card. Only authorized cards will operate the device. No physical contact is necessary.

Marine plate.

MARINE is the Fermax IP54 IK09 vandal-resistant plate. It is made of 2.5mm thick stainless steel. AISI 316L steel type.

Marine is the perfect choice to install in places with extreme weather conditions or in dangerous environments, humid or corrosive climates.

Marine plates do not include the recessed box or surface. This must be requested separately. The surface plates include a protective visor.

It is possible to combine two or more plates, as long as they are from the same series. To fit them perfectly, a set of spacers must be used for every two plates that are installed between their mounting boxes.

Steel color.

Dial pad.

System: DUOX PLUS (2-wire digital)

Technical specifications

The DIGITAL panels have a backlit keyboard and a 3.5" electronic directory to call homes.

The call to the home is made by entering the corresponding code assigned to the home + the "bell" key.

Electronic directory: allows you to search for names (home owners...) through the display and navigation buttons.

Access Control: through the numeric keypad, it incorporates access control functions using keyboard codes (previously programmed). The keypad allows up to 10,000 codes to open the door.

Radio frequency module (card reader and proximity key fobs):

Frequency: 125kHz

Maximum power: 572Nw

Video:

Sensor: 1/3" color CMOS.

Effective pixels > 340K. (camera captures 720x480)

Minimum external lighting: 0 lux. Since it has LEDs, no additional lighting is required.

S/N >45dB.

Frame rate 25 fps.

Resolution > 368x288 pixels.

Video Codec: H264 Highline Profile

Auto iris.

Auto BLC.

Viewing angle 100º horizontal, 80º vertical.

Fisheye correction.

Color night vision through white LEDs.

Pan & Tilt digital zoom.

Display Technical Specifications:

Size: 3.5 inches

Format: 4:3

Resolution: 320 x 240 pixels

Colors: 262,000

Contrast ratio: 500/1

Viewing direction: 12 o'clock

Luminance (cd/m2): 400 nits

Viewing angle: 160H/160V

Backlight: 6 LED diodes

Directory capacity: 10,000 users.

Supply voltage (via CN1):

5 V input (pin 1) with a tolerance of 5%.

PWR input: 12 Vdc + 5% (DUOX)

Total consumption: 88 mA +10% (STANDBY); 134 mA +10% (TFT ON)

Operating temperature: -25ºC, 70ºC

Relative humidity: 5% - 95%

Compatible with V 11.12 audio and V 11.12.12 video amplifiers

Display Module Measurement.

Module W: 105.2x95 mm (width-height).

Duox backlit display, 3.5" high brightness TFT for outdoors that facilitates and enhances the possibilities of the panel.

Integrated ONE-TO-ONE functions.

Viewing images.

Viewing custom messages

Directory keys and possibility of using the keyboard as alphanumeric.

Date and Time Indication.

Combination with pushbutton plates (max. 8 pushbuttons).

Possibility of connecting readers with Wiegand-26 and Data Clock protocol

Management from PC and connection through RS-485.

ST4 Series Board

Plate measurements: 150x485 mm (width-height).

Built-in box measurements: 130x465x55 mm (width-height-depth).

Surface box measurements (with visor): 154x489x96 mm (width-height-depth).

Visor measurements: 154x489x40 mm (width-height-depth).

Power: 18-24 Vdc

Consumption:

at rest: 260 mA.

active audio: 580 mA.

IP54 IK09

Audio power in the home-street direction: 2W

Audio power in the street-home direction: 0.15W

Adjustable volume in both directions

Operating temperature: -25 to 70 ºC