Fermax 1445 KIN MEET TOUCH PANEL

FUNCTIONS CALL TO DWELLING Visitors can call the desired Dwelling both from a General Entrance and from a Block Entrance.

It is possible to use numbers (0-9) and letters (AH).

AGENDA Visitors will also be able to locate calls by searching for the neighbor's name in the electronic directory.

The directory has a capacity of 10.

000 users (name and house number).

The management of the agenda is done through the integrated webserver.

CALL TO THE GUARD UNIT If a visitor or neighbor needs assistance from the guard unit, they can make a call from the panel (general or block) to any of the guard units assigned to them.

It is possible to assign up to 2 of the 98 possible guard units to each panel.

ADDITIONAL RELAYS It is possible to install up to 4 additional relays (a module Ref.

1491).

Neighbors will be able to open additional doors (garages, corridors, etc.

) when they receive a call from one of the inputs to their block.

ACCESS BY PIN CODE It is possible to define up to 8 access codes (pin), so that users can open the door.

These codes can be from 4 to 6 digits and are managed through the panel's own webserver.

FACIAL RECOGNITION Authorized residents can be identified by simply standing in front of the panel and pressing the FACEID button.

The door will open automatically.

This operation will also disconnect the alarm from your own home.

ACCESS CONTROL The board includes a Mifare card reader, and can control up to 100.

000 cards.

The management of the cards is done through the MEET Management Software.

It is also possible to connect to the board third-party readers that use the Wiegand 2 protocol (input and output functions).

IP CAMERAS It is possible to configure up to 4 IP cameras so that they can be used as an auxiliary camera for any monitor in the same block.

These cameras would be used to monitor visits, through corridors or common areas of the urbanization.

VIDEO STREAMING It is possible to constantly transmit the panel's camera through the RTSP protocol, so that it can be used by third-party devices (video recorders and/or CCTV security cameras).

It is not possible to send RTSP video and do facial recognition simultaneously.

ANTI-SABOTAGE The panel is protected against acts of vandalism (disassembly attempts).

In the event that the panel is separated from its location, it will send an alarm to the associated guard units and to the MEET Management Software.

Technical specifications

System: • CPU: Quad-core Cortex™-A7 1.

5GHz • GPU: Mali400MP2 • FLASH: 8GB eMMC Flash • SDRAM: 1GB DDR3L Screen: • 10.1” color TFT • Resolution 1024 x 600 pixel • Viewing angle: 130º H, 140º V • Contrast: 800/1 • Brightness : 300cd/m2 Audio: • Codec G.

711/G 729 Camera: • 1/3” CMOS Color • 120º diagonal Lens, Horizontal 105º, Vertical 55º • 1280 x 720 pixel • Minimum illumination: 0.

5 LUX.

Automatic activation of leds • AWB Power consumption: • At rest: 250 mA • In operation: 1000 mA • With heater active (*): 1500 mA Voltage: • 12 Vdc • PoE (*) Connectivity: • RJ-45 Ethernet connector • RS485 connection port for relay module and elevator control.

• Wiegand-26 connection for external access control reader.

• Configuration and remote management through webserver.

Environmental characteristics: • Temperature: -40 oC.