Optex OVS-01GT Optex ViiK vehicle detection sensor

Optex OVS-01GT. Optex ViiK vehicle detection sensor. Above ground vehicle sensor: no civil engineering work required. Combined FMCW (microwave) and ultrasonic dual technology detection. Designed for activation of automatic gates, barriers or industrial doors. Detects vehicles at speeds up to 20 km/h. Ovs-01gt.

Dual technology vehicle detection sensor designed to be used in conjunction with an automatic gate, barrier or industrial gate. Sensor mounted on the ground, it detects a vehicle arriving at a speed of 2 to 20 km/h until it stops. Vehicle detection is guaranteed thanks to the combination of microwaves and ultrasonic waves. In many cases, it can replace a ground loop sensor or video-based sensors.

Specifications

• Detection method: Combination of microwaves (Doppler shift and FMCW) and ultrasonics
• Frequency: 24GHz (microwave), 56kHz (ultrasonic)
• Microwave detection range: 0.8 ~ 5.5 meters programmable range
• Ultrasonic detection range: 0.1 ~ 1 meter programmable range
• Response time: 500 ms
• Vehicle speed to be detected: 2 ~ 20 km/h
• Sensitivity adjustable in 5 levels
• Adjustable presence detection timer
• Relay output: 30V DC, 0.3A (NO/NC switchable)
• Switchable active low/high input
• Power supply: 12V ~ 24V DC
• Consumption: Up to 200 mA at 24V DC (heater on), up to 80 mA at 24V DC (heater off)
• Operating temperature: -30°C ~ +50°C (-30°F ~ +50°F)
• Operating Humidity: Up to 95% (non-condensing)
• Indoor and outdoor installation environment
• Degree of protection IP65
• Installation height of 500 mm from the floor to the base of the detector
• Horizontal angle adjustment: ±30° (5° steps)
• Dimensions: 80 (W) x 175 (H) x 72,5 mm
• Weight: 480 g (including accessories)

- OPTEX-151