• -40%
Optex WXS-RDAM-X5 Detector Doble Tecnología vía radio…

Optex WXS-RDAM-X5 WX Shield series 180° panoramic wireless…

Optex
WXS-RDAM-X5
275,16 €
458,60 €
40%
TTC
WX Shield series 180° panoramic wireless Double Technology detector for outdoor use with active LED antimasking. Adjustable range up to 12m, 180°. X band microwave. Adjustable microwave range. Independent right and left side detection. Advanced SMDA processing logic. 14 pairs of horizontal…
Quantité
Disponible dans 24/48h

Optex WXS-RDAM-X5. WX Shield series 180° panoramic wireless Double Technology detector for outdoor use with active LED antimasking. Adjustable range up to 12m, 180°. X band microwave. Adjustable microwave range. Independent right and left side detection. Advanced SMDA processing logic. 14 pairs of horizontal detection zones and 2/4 vertical layers. Adjustable left/right detection range and sensitivity. Left and right alarm outputs, fault/tamper output. IP55. Self-powered by lithium batteries. Wxs-rdam-x5.

The WX Shield series is OPTEX's new bet for sensors with 180-degree panoramic detection, with flexibility in the distance and configuration of the detection area, as well as the option of low mounting (0.8-1.2 m) or high mounting ( 2 m), IR self-learning logic and anti-masking. Ideal for perimeter protection or flat roofs in residential or commercial installations. The WXS sensor is equipped with all the benefits of the Shield sensor category including double conductive mesh housing to avoid false alarms due to interference or intense light, automatic test mode and 5 year warranty. WXS-DRAM is the wireless model with dual technology (infrared and microwave). Wireless module and batteries not included.

Double technology and three-layer detection

The WXS series features a built-in microwave and infrared (PIR) algorithm that provides maximum detection stability; It is ideal for applications where there is strong sunlight or direct glare from cars onto the sensor. Panoramic 3-layer detection offers high reliability as the alarm will only be triggered when motion is detected by all 3 detection layers.

flexible installation height

The WXS outdoor sensors offer high or low mounting options offering a flexible detection area of ??between 2.5 and 12 m. In the 2m high mount option, the volumetric detection area is 9m; high mounting is effective in preventing vandalism or lens masking.

Two independent left/right detection areas

In low mount, the WXS intrusion sensors have two independent detection areas 90 degrees to the left and right. Each of these areas can be configured independently for detection distance, sensitivity and independent alarm output, which is very useful for activating security cameras.

Screening analysis and animal immunity

WX Shield intrusion detection sensors are designed to be immune to pets and small animals, which means that the alarm is not activated by cats, dogs or birds, giving great stability to the detection area. In addition, the sensors have the multi-dimensional logic (SMDA) patented by OPTEX, which discards environmental changes such as vegetation, shade, etc. which gives great stability to the sensor.

Characteristic

Up to 12 meters, 180°, outdoor wireless PIR with anti-masking

Double technology (4 PIR + 2MW), three-layer detection and animal immunity

Low (0.8~1.2 meters) or high (2 meters) mounting option

Independent left/right detection and alarm output (ideal for CCTV)

specs

180° Panoramic Double Technology Detector for Outdoors

Panoramic three-layer detection: Triggers an alarm only when all three detection layers (upper and lower PIR sensors and microwave sensor) detect motion

Antimasking by active LED

Detection Method: Passive Infrared and Microwave

180° coverage angle

High mounting height: 2 meters

Low mounting height: 0.8 ~ 1.2 meters

14 pairs of horizontal detection zones and 2 vertical layers mounted between 0.8 and 1.2 meters high or 4 vertical layers mounted at 2 meters high

Fixed range of 9 meters mounted at 2 meters height

Adjustable range between 2.5 and 12 meters mounted between 0.8 and 1.2 meters high

Detection speed from 0.3 to 2 m/s

Adjustable left/right detection range between 2.5 and 12 meters (0.8 ~ 1.2m height)

Sensitivity from 2°C to 0.6m/s adjustable for each side individually

X band microwave frequency (10.525 GHz)

The microwave sensitivity can also be individually adjusted via a switch

Alarm period of 2.0 ± 1.0 sec.

Boot time of 60 seconds or less (once the LED lights up)

Digital IR anti-masking function self-learning function

Double conductive shield

Advanced SMDA (multidimensional analysis) processing logic

Right alarm relay: Individual, right or general, NC/NO selectable (solid state switch, 10V DC, 0.01A)

Left alarm relay: Individual, left or general, NC/NO selectable (solid state switch, 10V DC, 0.1A)

Fault output: NC (28V DC, 0.1A)

Tamper output: The tamper output is shared with the "TR" fault output.

Power: 3V ~ 3.6V DC (lithium batteries) /24 µA ~ 6 mA at 3V

Operating temperature -20°C ~ +45°C

Relative humidity up to 95%

Degree of protection IP55

Wall or pole mount

Includes bubble level to facilitate installation

Dimensions: 91.7 (W) x 201.5 (H) x 124.3 (D) mm

Weight: 770g

- OPTEX-165

WXS-RDAM-X5

Résumé

0

star_border star_border star_border star_border star_border

(0 Avis des clients)

Sélectionnez une ligne ci-dessous pour filtrer les avis.

Seuls les utilisateurs qui ont déjà acheté le produit peuvent ajouter une critique.

Aucun avis n'a été publié pour le moment.

Vous pourriez également être intéressé