Optex QXI-R PIR QUAD detector for 120° wireless from the QX…

The QX Infinity (QXI) series is a family of dual-technology infrared sensors offering a wide 120° detection angle and 12m coverage. Its elegant and compact design makes QXI sensors an ideal model for any residential or commercial building, offering reliable motion detection, animal immunity and activation of CCTV camera alarm panels. OPTEX-176 (QXI-R) is the wireless model.

Adjustable mounting height

QXI outdoor intrusion detectors can be installed high - between 2.2m and 2.7m high - a multi-level volumetric detection pattern that allows you to ignore small animals. In environments with large animals, the sensor can be mounted between 0.8 and 1.2 m high, to ignore the passage of pets.

Detection pattern analysis to ignore false alarms

All QXI models are provided with an analysis logic called SMDA, which analyzes the detection pattern and changes in the environment, such as weather or vegetation movements, to discriminate noise and the cause of nuisance false alarms. . In addition, the entire QXI range is provided with a double conductive cover to filter interference due to light or electromagnetic.

Practical wireless technology

The QXI-R wireless sensor can be added to most wireless alarm systems and provides the benefit of quickly and effectively protecting access to premises or any other outside building. The housing can be adapted to most of the wireless transmitters available on the market.

Characteristic

12m, 120 degrees, PIR via radio for outdoor

QUAD pyrosensor, two detection layers and good tolerance to small animals

High mount (2.2-2.7m) or regular mount to ignore pets

SMDA logic and double conductive jacket to minimize false alarms

PIR QUAD detector for outdoor wireless

Detection Method: Passive Infrared

12 meter range

120° coverage angle

PIR Zones: 40 zones (Multilevel), 18 zones (pet alley)

Detection speed: 0.3~2m/s

Sensitivity: 2°C at 0.6m/s

Pet Alley: Remove bottom detection to ignore small animals

Mounting height: 2.2 ~ 2.7 meters (multi-level), 0.8 ~ 1.2 meters (pet alley)

Alarm period: 2 sec. (±0.5 sec.)

Boot period: 60 sec. (approx.)

Alarm output: NC/NO, selectable, solid state switch, 3V DC, 0.01A

Fault (and tamper) output: NC/NO, selectable, solid state switch, 3V DC, 0.01A

LED indicator: 1. Readiness, 2. Alarm, 3. End of walk test

Power: CR123A battery (not included) 3V DC

Current Draw: 9 μA hold, 11 mA maximum at 3V DC

Operating temperature -40°C ~ +60°C

Relative humidity up to 95%

Degree of protection IP54

Wall mount (interior or exterior)

Optional wall (OPTEX-37) and ceiling (OPTEX-38) brackets with horizontal and vertical adjustment

Dimensions: 78 (W) x 144.5 (H) x 83.5 (D) mm