Optex FD322-RAPIDFIBER-200M Fiber optic perimeter intrusion…

Optex FD322-RAPIDFIBER-200M. Fiber optic perimeter intrusion detection system kit for fencing. Comprised of a two-zone controller with up to 200 meters of fiber-optic detection (sold separately), a polycarbonate IP66 housing with anti tamper and programming software. 12V DC / 24V DC. Fd322-rapidfiber-200m.

- Fiber optic perimeter intrusion detection system kit for fencing

- Consisting of a two-zone controller, a tamper-proof polycarbonate IP66 housing with anti tamper and programming software

- The controller provides two protection zones (one on each side) up to 200 meters of detection each by optical fiber

- Each zone has independent alarm output

- It uses sophisticated algorithms to detect intruders that try to climb, to cut the enclosure or to crawl under the same one

- Discriminates false alarms caused by small animals or the wind

- Unlike metallic (coaxial) sensors, fiber optics resist hostile environments, such as UV radiation, moisture, saltpeter, etc.

- Depending on the length of the fencing of the areas to be covered, the necessary fiber set (sold separately) must be installed:

  • 75 meters of fencing: Roll of 160 meters OPTEX-109 (RRF-75)

  • 100 meters of fencing: Roll of 210 meters OPTEX-110 (RRF100)

  • 150 meters of fencing: Roll of 310 meters OPTEX-111 (RRF150)

  • 200 meters of fencing: Roll of 410 meters OPTEX-112 (RRF200)

- In case of an intruder detected, the controller sends an alert through the alarm relays to turn on lights, surveillance cameras, sirens or to send the alarm to an intrusion switch

- It has 2 channels of input / output (one channel per zone) of optical fiber with ST connectors

- Fault, event, alarm and power LED indicators

- Communication via RS-232 serial port and IP over Ethernet

- 2 anti tamper inputs

- 2 fault outputs

- Operating temperature -40 ° C ~ + 70 ° C

- OPTEX-107