Optex VXI-DAM/CMOD OPTEX VX Infinity intrusion detector kit with…

Optex VXI-DAM/CMOD. OPTEX VX Infinity intrusion detector kit with anti-masking and dual technology + Wireless HD camera with 180° panoramic angle for visual verification of VX Infinity sensor alarm activations, day and night. 2MP sensor. H.264 HP. IP55 MicroSD (max.32Gb). 24VDC. Vxi-dam/cmod.

Characteristic

A powerful combination of intelligent outdoor detection and HD camera that offers a reliable alarm video verification solution for home and business security. The solution relies on OPTEX's best-selling outdoor intrusion sensor, VX Infinity, complete with instant notification, live streaming and recording from the 180 degree HD camera module that is also easy to mount and has night vision. The outdoor sensor and Wi-Fi camera can be added to an existing alarm panel or installed as a stand-alone outdoor intrusion detection solution and managed directly from a mobile app. OPTEX-188 (VXI-DAM) is the wired sensor with dual technology that has anti-masking (anti-masking).

Camera

Wireless connectivity: IEEE 802.11 b/g/n

Data encryption: AES 128-bit data encryption using its own P2P connection protocol

Security: WEP/ WPA/ WPA2 (TKIP, 128-bit AES)

Simultaneous views: OPTEX Vision App: Max. 3 users at the same time live view. *Quality may be affected when connecting multiple

mobile simultaneously

Sensor image: 2MP (Full HD)

Image Resolution: 1,080P/ 720P/ VGA (Selectable from App)

View Angle: H: 180° V: 100°

Minimum illumination: 0 lux (with infrared illumination)

Night View: Low and High Infrared LED Light with IR Switch

Image Compression: H.264 HP

Image resolution: Full HD

Frames per second: OPTEX Vision App: 15 FPS, RTSP: 10 FPS

IP address: DHCP or fixed IP

RTSP Authentication: Digest Authentication on or off

Recording duration: OPTEX Vision App: 30 seconds (inc. 2 seconds before alarm)

Memory card: microSD card (max. 32 GB)

Power input: 9.5 to 24 V DC

Current consumption: Low infrared mode: max. 400 mA / High infrared mode: max. 1.0A

Activation time: 2 min.

LED indicator: 1 LED (red and blue)

Microphone: Integrated (audio only available with the OPTEX Vision App)

IR mode selector: High / Low

Antenna: The external antenna (CMOD-ANT) is an optional accessory not included

Installation: Outdoor / Indoor

Operating temperature: -10°C to +50°C

Operating humidity: 90% max. (not condensed)

IP rate: IP 55

Detector

Detection Method: Passive Infrared and Microwave

PIR detection coverage: 12 m, wide 90° / 16 zones

PIR maximum distance: 12 - 2.5 m (5 levels)

Detectable speed: 0.3 - 1.5m/s

Sensitivity: 2°C at 0.6m/s

Power input: 9.5 – 18 VDC

Current consumption: 35 mA (max) at 12 VDC

Alarm period: 2 ±1 sec.

Preparation period: Approx. 60 sec (LED flashes)

Alarm output: [N.O. or N.C] selectable, 28 VDC 0.1 A max.

Trouble output: N.C. 28 VDC 0.1 A max.

Tamper Output: N.C. 28 VDC 0.1 A max. Activates when cover is removed

LED indicator: Red: Preparation, Alarm, masking

RF interference: No alarm 10V/m

Operating temperature: -20 to +45°C

Operating humidity: 95% max.

International protection: IP55

Mounting: Wall, pole (outdoor / indoor)

Mounting height: 0.8 - 1.2m

- OPTEX-189