- Rupture de stock
LNB Unicable Quad con un puerto "legacy" que permite la conexión de hasta 4 STB utilizando un único cable. Bajo ruido de fase, compatible DVB-S2 (HDTV). Bajo consumo de energía. Aislamiento de polarización cruzada. Estabilidad en altas frecuencias.
LNB Inverto Unicable Quad 40mm with 1 Legacy port
inverto-3013
72,00 €
TTC
LNB Unicable Quad con un puerto "legacy" que permite la conexión de hasta 4 STB utilizando un único cable. Bajo ruido de fase, compatible DVB-S2 (HDTV). Bajo consumo de energía. Aislamiento de polarización cruzada. Estabilidad en altas frecuencias.
A member of the innovative and award winning Unicable LNB series this highly competitive product enables the connection of up to 4 STBs using a single cable (providing STBs are Unicable compliant) over its Unicable port as well as one more STB over its “Legacy” port. The product is supplied with one splitter unit (optional) for a flexible distribution of the satellite signal at home. It was specifically designed for the European DTH markets, and provides optimized reception capabilities for High Definition transmissions. Manufactured to the highest industry quality standards and with excellent noise figure and phase noise performance, this LNB is an ideal solution for multi-room satellite reception and is a product of choice for most leading digital satellite TV operators across Europe.
Caractéristiques
- Low Phase Noise, HDTV-DVBS2 compliant
- Low Noise Figure
- Low Power Consumption
- Very high Cross Polarization Isolation
- Very high Frequency Stability
- 1 Legacy Port
Spécifications
| Low Band Input Frequency Range | 10.7 ~ 11.7 GHz |
| Low Band Output Frequency Range | 950 ~ 1950 MHz |
| Low Band LO Frequency | 9.75 GHz |
| High Band Input Frequency Range | 11.7 ~ 12.75 GHz |
| High Band Output Frequency Range | 1100 ~ 2150 MHz |
| High Band LO Frequency | 10.6 GHz |
| Noise Figure | 0.7 dB Max. |
| LO Initial Accuracy | +/- 1.0 MHz Max. |
| LO Temperature Drift | +/- 2.5 MHz Max. |
| Phase Noise (@ 10 kHz) | - 90 dBc / Hz Max. |
| SCR Conversion Gain | 57 dB Min. |
| Legacy Conversion Gain | 55 dB Min. |
| Gain Ripple (Over 26 MHz Bandwidth) | +/- 0.75 dB |
| Gain Variation (Over Full Band) | +/- 4 dB Max. |
| Image Rejection | 40 dB Min. |
| 1 dB Compression Point (@ Output) | 0.0 dBm Min. |
| Cross Polarization Isolation | 22 dB Min. |
| Output VSWR | 2.5 : 1 |
| In-Band Spurious | - 60 dBm Max. |
| Output IF Channel 1 (SCR0) | 1210 MHz |
| Output IF Channel 2 (SCR1) | 1420 MHz |
| Output IF Channel 3 (SCR2) | 1680 MHz |
| Output IF Channel 4 (SCR3) | 2040 MHz |
| Channel Isolation | 20 dB Min. |
| Legacy Ports | 1 |
| SCR's Control Signals | DiSEqC command extension based on EN-50494 |
| Legacy Switch Voltage Control | < 14.2 V (Vertical), > 15 V (Horizontal) |
| Legacy 22 k Sensitivity | 220 mV Min. |
| Current Consumption | 250 mA Max. @ 13.5 V |
| Operating Temperature | - 30 °C ~ + 60 °C |
| Output Impedance | 75 Ω |
| Output Connector | F-Type (Female) |
| Weight | 350 g |
Video del modelo de dos puertos. Es igual pero con un puerto mas:
inverto-3013
Fiche technique
- Sortir
- Quad
- Type
- Unicable
Résumé
0
(0 Avis des clients)
Sélectionnez une ligne ci-dessous pour filtrer les avis.
Seuls les utilisateurs qui ont déjà acheté le produit peuvent ajouter une critique.
Aucun avis n'a été publié pour le moment.